Hi all, just installed redhat 7.3 and tried connecting with adsl, followed
the adsl howto step by step which works fine with 7.2, so here is what I
get:
I get ip address but cant ping nowhere!
[root@localhost /]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:C0:4F:7E:FB:74
inet addr:10.200.1.1 Bcast:10.255.255.255 Mask:255.0.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:88 errors:0 dropped:0 overruns:0 frame:0
TX packets:166 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:7026 (6.8 Kb) TX bytes:11305 (11.0 Kb)
Interrupt:11 Base address:0xdc00
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:78 errors:0 dropped:0 overruns:0 frame:0
TX packets:78 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:7042 (6.8 Kb) TX bytes:7042 (6.8 Kb)
ppp0 Link encap:Point-to-Point Protocol
inet addr:212.179.243.187 P-t-P:212.179.243.1 Mask:255.255.255.
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1452 Metric:1
RX packets:17 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:694 (694.0 b) TX bytes:58 (58.0 b)
[root@localhost /]# netstat -r -n
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt
Iface
212.179.243.1 0.0.0.0 255.255.255.255 UH 40 0 0
ppp0
10.0.0.0 0.0.0.0 255.0.0.0 U 40 0 0
eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 40 0 0 lo
0.0.0.0 10.255.255.254 0.0.0.0 UG 40 0 0
eth0
[root@localhost /]# ping 194.90.1.5
PING 194.90.1.5 (194.90.1.5) from 10.200.1.1 : 56(84) bytes of data.
>From 10.200.1.1 icmp_seq=1 Destination Host Unreachable
>From 10.200.1.1 icmp_seq=2 Destination Host Unreachable
>From 10.200.1.1 icmp_seq=3 Destination Host Unreachable
>From 10.200.1.1 icmp_seq=4 Destination Host Unreachable
>From 10.200.1.1 icmp_seq=5 Destination Host Unreachable
>From 10.200.1.1 icmp_seq=6 Destination Host Unreachable
--- 194.90.1.5 ping statistics ---
7 packets transmitted, 0 received, +6 errors, 100% loss, time 6025ms
needless to say cant surf:(
Any ideas?
=================================================================
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
