/etc/eciadsl/vidpid: 1690/0205 0915/0206
The DOCTOR program looks for those values. In our case, it find the value 211, not 205 or 206, thus report fatal error. Attached the content of
/proc/bus/usb/devices
where the vid and pid are not as expected by DOCTOR:
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=c8859000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=1690 ProdID=0211 Rev= 1.00
S: Manufacturer=GlobeSpan Inc.
S: Product=USB-ADSL Modem
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=81(I) Atr=03(Int.) MxPS= 32 Ivl=3ms
I: If#= 0 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=82(I) Atr=01(Isoc) MxPS=1008 Ivl=1ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=81(I) Atr=03(Int.) MxPS= 32 Ivl=3ms
I: If#= 0 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=82(I) Atr=01(Isoc) MxPS= 912 Ivl=1ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=81(I) Atr=03(Int.) MxPS= 32 Ivl=3ms
I: If#= 0 Alt= 3 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=82(I) Atr=01(Isoc) MxPS= 736 Ivl=1ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=81(I) Atr=03(Int.) MxPS= 32 Ivl=3ms
I: If#= 0 Alt= 4 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=82(I) Atr=01(Isoc) MxPS= 448 Ivl=1ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=81(I) Atr=03(Int.) MxPS= 32 Ivl=3ms
I: If#= 0 Alt= 5 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=82(I) Atr=01(Isoc) MxPS= 240 Ivl=1ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=81(I) Atr=03(Int.) MxPS= 32 Ivl=3ms
I: If#= 0 Alt= 6 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=82(I) Atr=01(Isoc) MxPS= 80 Ivl=1ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=81(I) Atr=03(Int.) MxPS= 32 Ivl=3ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=c8857000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
I tried to manually hack the vidpid file, but it failed though.
With best regards
Yosi Yarchi
Michael Stolovitzsky wrote:
On Sunday 15 December 2002 18:55, yosi yarchi wrote: Did you really unplug/replug your modem before launching this script?Hi All I 've just got ROTAL's ADSL USB modem. I didn't get the old one (ALE070) which proved to work under linux, but newer one, ALE130 (very small size). I couldn't operate it with the provided package. I suspect the reason is that it identifies itself as unknown USB device. Attached the output of PROBE and DOCTOR programs. Have one any idea about what changes could be done to make it work also? PROBE .LOG: ------------------ WARNING: before probing, please ensure that your USB devices are plugged in and that your system's USB support is properly configured USB modem to probe must be UNinitialized, it will surely appear as an unknown device (because it is not initialized yet), for instance: ? (0547:2131) your USB devices: 1: USB OHCI Root Hub (0000:0000) 2: USB-ADSL Modem / GlobeSpan Inc. (1690:0211) 3: USB OHCI Root Hub (0000:0000) enter device to probe (1-3): probing, please wait.. your USB devices now: 1: USB OHCI Root Hub (0000:0000) 2: USB-ADSL Modem / GlobeSpan Inc. (1690:0211) 3: USB OHCI Root Hub (0000:0000) probed USB device: USB OHCI Root Hub VID1=0000, PID1=0000 VID2=0000, PID2=0000 Did you really unplug/replug your modem before launching this script? DOCTOR.LOG: ----------------- You are using linux kernel version 2.4.18-14 Support for USB is OK Preliminary USB device filesystem is OK dabusb module is not loaded: OK ehci-hcd module is not loaded: OK OHCI support is OK /dev/ppp is OK HDLC support is OK HDLC support is OK (no bug) vid/pid read from /etc/eciadsl/vidpid: 1690/0205 0915/0206 I cannot find your ADSL modem: Fatal With best regards Yosi Yarchi ================================================================= To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
================================================================= To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
