I did as you said , but got the same reaction , vmvet shown as used by 6 but no remark and vmmon is shown as unused and marked as used 0 .
any other options : Asaf -----Original Message----- From: Hetz Ben-Hamo [mailto:[EMAIL PROTECTED] Sent: Tuesday, July 22, 2003 4:15 PM To: Assaf Flatto; [EMAIL PROTECTED] Subject: Re: Problem with VmWare 4 uninstall VMWare 4, remove any old vmware modules (vmnet, vmmon, etc) and re- install. Hetz ---------- Original Message ----------- From: "Assaf Flatto" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Sent: Tue, 22 Jul 2003 15:08:21 +0200 Subject: Problem with VmWare 4 > Hello > > I'm running MDK 9.1 (2.4.21.0-13MDK ) 256 MB Ram 850Mhz intel . I > installed Vmware 4 build 4460 and tired to configure my NT partition > to load up and work. When i press the power on i get a failure output > that states that /dev/vmmon does not exist and to check that the vmmon > module is loaded lsmod shows the module is loaded and unused , doing > rmmod and insmod loads the module fine but the error reoccur . > i'm trying to run the NT from the /dev/hda1 partition on my HD where my > linux is on the hda5-11. > I tried to find an answer in the VMware documantation and in the > archives but found nothing resembeling this problem . > > if anyone has any idea on what the problem is - i'd appriciate any > help. > > Thanks > > Assaf > ================================= > Assaf Flatto > > ---------------------------------------------------------------------- > ------- ---------------------------------- > This e-mail message may contain confidential, commercial and > privileged information or data that constitute proprietary information > of Cellcom Israel Ltd. Any review or distribution by others is > strictly prohibited. If you are not the intended recipient you are > hereby notified that any use of this information or data by any other > person is absolutely prohibited. If you are not the intended recipient, > please delete all copies and contact us by e-mailing to: [EMAIL PROTECTED] > Thank You. > > ================================================================To unsubscribe, send mail to [EMAIL PROTECTED] with > the word "unsubscribe" in the message body, e.g., run the command echo > unsubscribe | mail [EMAIL PROTECTED] ------- End of Original Message ------- --------------------------------------------------------------------------------------------------------------- This e-mail message may contain confidential, commercial and privileged information or data that constitute proprietary information of Cellcom Israel Ltd. Any review or distribution by others is strictly prohibited. If you are not the intended recipient you are hereby notified that any use of this information or data by any other person is absolutely prohibited. If you are not the intended recipient, please delete all copies and contact us by e-mailing to: [EMAIL PROTECTED] Thank You. ================================================================To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
