I sent this 14 hours ago and it didn't reach the list so here's anoher try.
Hi, I have what MAY be a related problem with XawTV, so I'll try to take advantage of Amichai's question to possibly solve my problem too. I have a FlyVideo2000 TV card. I was not able to configure it properly. But I discovered that I could use an old VCR as an improvised "MEMIR". What I mean is that when I connect the TV card's antenna sockket directly to the HOT wall outlet, I get nothing, but if I put the VCR in the middle (i.e I connect the FlyVideo2000 to the VCR's RF out socket and the VCR's antenna socket to the wall socket), I can now choose channels using the VCR remote control. On Tuesday 05 October 2004 01:43, Amichai Rotman wrote: > Hi All, > > Any of you succeeded in creating /configuring XawTV to work with an > analogue broadcast from HOT (cable)? > > I have the Freq Table, but I am not sure how to create the file and I > noticed Israel isn't listed in the scantv tables... > > Any HOWTO / pointers? > > Thanks ! > > Amichai. > > ================================================================= > To unsubscribe, send mail to [EMAIL PROTECTED] with > the word "unsubscribe" in the message body, e.g., run the command > echo unsubscribe | mail [EMAIL PROTECTED] -- Shlomo Solomon http://come.to/shlomo.solomon Sent by KMail 1.6.1 (KDE 3.2) on LINUX Mandrake 10.0 ================================================================= To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
