On Sat, Nov 27, 2004 at 12:43:03AM +0200, Matan Ziv-Av wrote:
>
> Try running evtest (source attached ) on the correct device
> - It could be /dev/input/event0, /dev/input/event1, etc. depending on
> how many other HID devices you have. When evtest runs, create events
> (for example, disconnect the UPS from the mains and reconnect).
>
Needless to say, have the UPS drive a dummy load when you do that. For
example:
+----------------+
| comm out |----- A PC
| UPS |
| 220V out |----- A lamp (bulb)
+----------------+
Obviously, the PC would get 220V from another source, possibly the
mains electricity. In addition, the bulb is not necessary if any event
will do, as opposed to the event that the UPS cuts the power to the
load.
=================================================================
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
