Hello Evgeny,
I see you have alarms on two things:
1. Fan2 speed - should be 5120RPM, is 4772RPM. The fan might be dirty, so
its motor cannot rotate it as fast as it should be.
2. VCore - the limits are 0.00V to 0.00V, and you have "normal" VCore.
Here you should fix the limits. I do not have a clue how to do so.
--- Omer
On Thu, 2 Dec 2004, Evgeny Gesin wrote:
> Could you please tell me what are these alarms and how
> to fix it?
>
> # sensors
> smsc47m1-isa-0800
> Adapter: ISA adapter
> fan1: 0 RPM (min = 5120 RPM, div = 1)
> fan2: 4772 RPM (min = 5120 RPM, div = 1) ALARM
>
> eeprom-i2c-0-51
> Adapter: SMBus I801 adapter at efa0
> Memory type: DRDRAM RIMM
> Memory size (MB): 128
>
> eeprom-i2c-0-50
> Adapter: SMBus I801 adapter at efa0
> Memory type: DRDRAM RIMM
> Memory size (MB): 256
>
> adm1025-i2c-0-2d
> Adapter: SMBus I801 adapter at efa0
> +2.5V: +2.47 V (min = +2.25 V, max = +2.75 V)
> VCore: +1.69 V (min = +0.00 V, max = +0.00 V)
> ALARM
> +3.3V: +3.32 V (min = +2.97 V, max = +3.63 V)
> +5V: +4.87 V (min = +4.50 V, max = +5.50 V)
> +12V: +11.94 V(min = +10.81 V, max = +13.19 V)
> VCC: +3.27 V (min = +2.97 V, max = +3.63 V)
> CPU Temp:+46.0°C (low = +10°C, high = +60°C)
> M/B Temp:+35.0°C (low = +10°C, high = +45°C)
================================================================To unsubscribe,
send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
