On Friday 24 December 2004 23:56, Pinchas Rosenfeld wrote: > My Main Work Station is now running Mandrake-10.1-Official. > I plan to replace my MAG 770PF monitor with A MAG 786PF or a LG > 710BH. To the best of my knowledge there is no suitable driver for > these monitors on MDK-10.1 -Official, only a generic driver. > Does anybody have any experience with these monitors on MDK-10.1 ? > Any help would be appreciated.
I'm not familiar with these exact models, but usually you can get away with choosing something which is close enough (same as for MS-Windows btw), for example MDK lists MAG 786FD as a supported monitor. If the results are less the satisfactory (check the vertical refresh in your chosen resolution and match it against what the manual says you can get), then - as Ido said - you can just pick "Custom" from the list and feed in the vertical and horizontal frequencey rage from the Monitor's manual (the specs are most probably also available on the web if you don't have the manual). That being said, Mandrake's X11 configuration also supports a so called "Plug n' Play" mode which some times works as advertised. > Thanks > Pinchas > > =========================== > Pinchas Rosenfeld > P.O. BOX 307 > Ness-Ziona, Israel 74103 > Phone: +(972) 8 9402910 > Fax: +(972) 8 9402081 > email: [EMAIL PROTECTED] Please use a standard sig delimiter on your emails (a line with only '--') so that my email software can automaticly cut out your sig when replying. See below -- Oded ::.. Famous Last Words 025-"This 250' wall has so many holes, it should be easy to climb." ================================================================= To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
