Roberto S. Meyer wrote:
Muli Ben-Yehuda escribi�/wrote/a �crit:
On Wed, Jun 01, 2005 at 12:42:34PM -0300, Roberto S. Meyer wrote:
Hi,
I'm having trouble that I think can be compared to this[1] FAQ,
but the link to the possible answer[2] is broken.
it's available at http://www.mulix.org/adsl-howto.txt. I'm amazed
anyone still reads it!
Could it be an mtu problem?
Certainly sounds that way. Just drop the MTU on the inner interface to
Great!
~1300 and see if that fixes it.
What do you mean by inner interface? ppp1 (pptp)?
Which mtu/mru values do you suggest for eth0 (1500?), ppp0
(pppoe, 1492?) and ppp1 (pptp, 1300?)
Thank you for your advice.
If you're having trouble connecting from the actual machine doing the
dialing, then this is likely not the problem.
Run "ifconfig". What are the MTU values (when you perform no change) you
get for all relevant interfaces (i.e. the ethernet, ppp0 and ppp1)?
Shachar
--
Shachar Shemesh
Lingnu Open Source Consulting ltd.
Have you backed up today's work? http://www.lingnu.com/backup.html
=================================================================
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
