ifup fires it.
Anyway,
I also thrown that garbage of a pump :), and moved to dhclient, much much
better.
Regards,
tzahi.
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Yedidyah Bar-David
> Sent: Wednesday, November 30, 2005 8:40 AM
> To: Eli Marmor
> Cc: linux ILUG
> Subject: Re: Killing pump. Forever.
>
> On Wed, Nov 30, 2005 at 05:40:44AM +0200, Eli Marmor wrote:
> > Hi,
> >
> > I know that I can look for the answer in the operating system, but
> > maybe one has a faster answer:
> >
> > Under Morphix (a Debian-based live-CD distro), I have a running DHCP
> > client daemon, running as "pump -i eth0". To disable it, I use
> > "pump -k", which works flawlessly. However, after many
> hours (cron?), a
> > new "pump -i eth0" is started. From first look, it's hard
> to find who
> > fired it (because it's a daemon and has no direct parent),
> and how to
> > avoid it. I know that I can find it myself, but a fast
> answer may save
> > me the time.
>
> I don't know about Morphix, but Debian has /etc/network/interfaces for
> NIC configuration. Edit it if you want static addressing. E.g. change
> auto eth0
> iface eth0 inet dhcp
> to
> auto eth0
> iface eth0 inet static
> address 10.0.0.1
> network 10.0.0.0
> netmask 255.255.255.0
> broadcast 10.255.255.255
> gateway 10.0.0.100
> or simply comment out 'auto eth0' if you do not want it started.
> I have no idea what tries to start it other than during boot.
> If you do
> want to continue having it dhcp and only get annoyed by the process go
> on running (which is usually a good thing, unless you use static
> allocation in your dhcp server), grep for ifup.
> --
> Didi
>
>
> =================================================================
> To unsubscribe, send mail to [EMAIL PROTECTED] with
> the word "unsubscribe" in the message body, e.g., run the command
> echo unsubscribe | mail [EMAIL PROTECTED]
>
>
>
=================================================================
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
