Hi, Here is my problem. I've installed KnoppMyth and gotten it runing. I use an AverTV GO 007 FM Plus capture card. I've been able to get everything running EXCEPT the remote control.
When I tried to use the included version of lirc, it told me there was no module for the card and I had to install it myself. I donwloaded and configured it for an avermedia remote (tried all three versions) and when I try to modprobe the lirc_gpio module it fails, because it does not find the gpio to read the remote data from. Therefore all of the lirc programs that let you test the remote, etc fail. That's the first problem. The second one is that when MythTV starts I get: irxevent: could not connect to socket irxevent: Connection refused and mythtv: could not connect to socket mythtv: Connection refused lirc_init failed for mythtv, see preceding messages BUT the remote sort of works. Some keys (up/down/right/left arrows) work, but nothing else. Changing the /etc/lircd.conf to define the remote (assuming I have the right definitions) does not work. The question that I have is if MythTV is activating lirc on it's own, which files defines the remote codes and which file defines the events they are mapped to? There is plenty of documentation for this when lirc works, but none for when it doesn't (but works anyway). Any help would be appreciated, thanks in advance. Geoff. -- Geoffrey S. Mendelson, Jerusalem, Israel [EMAIL PROTECTED] N3OWJ/4X1GM IL Voice: (07)-7424-1667 IL Fax: 972-2-648-1443 U.S. Voice: 1-215-821-1838 Visit my 'blog at http://geoffstechno.livejournal.com/ ================================================================= To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
