May be a stupid question - have you checked if all these are also installed:
mtpfs mtp-tools I am running Ubuntu 12.04.3 and own a Samsung Galaxy III (GT-I9300). I gave up on trying to make it work. it is recognized, but keep stating it is unable to mount the device. I use File Expert [1] to move files over WiFi. There is also Air Droid and, if you really must - Kies Air... I discovered there is no much use for connecting the phone via USB. It doesn't even work as it should on Windows... Is there a specific reason you need to connect via USB? [1] https://play.google.com/store/apps/details?id=xcxin.filexpert Good Luck! Amichai. 2013/10/6 ik <[email protected]> > The dmesg errors: > .... > [90892.247976] usb 4-1.2: new high-speed USB device number 61 using > ehci-pci > [90892.336150] usbip-host 4-1.2:1.0: 4-1.2 is not in match_busid table... > skip! > [90892.336484] usbip-host 4-1.2:1.1: 4-1.2 is not in match_busid table... > skip! > [90892.336511] cdc_acm 4-1.2:1.1: This device cannot do calls on its own. > It is not a modem. > [90892.336589] cdc_acm 4-1.2:1.1: ttyACM3: USB ACM device > [90892.337460] usbip-host 4-1.2:1.3: 4-1.2 is not in match_busid table... > skip! > [90892.410843] usb 4-1.2: usbfs: process 30325 (go-mtpfs) did not claim > interface 0 before use > [90892.438597] usb 4-1.2: USB disconnect, device number 61 > [90892.628063] usb 4-1.2: new high-speed USB device number 62 using > ehci-pci > [90892.715178] usbip-host 4-1.2:1.0: 4-1.2 is not in match_busid table... > skip! > [90892.715538] usbip-host 4-1.2:1.1: 4-1.2 is not in match_busid table... > skip! > [90892.715552] cdc_acm 4-1.2:1.1: This device cannot do calls on its own. > It is not a modem. > [90892.715619] cdc_acm 4-1.2:1.1: ttyACM3: USB ACM device > [90892.716359] usbip-host 4-1.2:1.3: 4-1.2 is not in match_busid table... > skip! > [90892.781898] usb 4-1.2: USB disconnect, device number 62 > ... > > Eliyaho: On a Windows machine, with usb2 it does work. > > > > On Sun, Oct 6, 2013 at 4:50 PM, ik <[email protected]> wrote: > >> Hello, >> >> I'm using Arch Linux, and have Samsung Galaxy S4. >> It uses MTP in order to allow me to access files. >> >> I'ved read several wiki's (Including Arch wiki) and forums about it, and >> came out for the following settings (/etc/udev/rules.d/51-android.rules), >> after install go-mtpfs: >> >> # Galaxy S4 GT-I9500 >> ATTR{idVendor}=="04e8", ATTR{idProduct}=="685d", SYMLINK+="android_adb", >> MODE="0666" >> ATTR{idVendor}=="04e8", ATTR{idProduct}=="6860", SYMLINK+="android_adb", >> MODE="0666" >> ATTR{idVendor}=="04e8", ATTR{idProduct}=="6860", SYMLINK+="android_adb", >> MODE="0666", ACTION=="add", RUN+="/usr/bin/sudo -b -u ik /usr/bin/go-mtpfs >> -allow-other=true -android=true /mnt/ando" >> ATTR{idVendor}=="04e8", ATTR{idProduct}=="6860", SYMLINK+="android_adb", >> MODE="0666", ACTION=="remove", RUN+="/bin/umount /mnt/ando" >> >> >> It does mount properly the content, however, when I try to access the >> content, it keep on looping an remounting everything until I take off the >> USB cable. >> I then need to wait several minutes to try again, or the loop just >> continue ... >> >> I can see the remounting also in /var/log/messages and dmesg. >> >> What am I missing or doing wrong here ? >> >> Thanks, >> Ido >> > > > _______________________________________________ > Linux-il mailing list > [email protected] > http://mailman.cs.huji.ac.il/mailman/listinfo/linux-il > >
_______________________________________________ Linux-il mailing list [email protected] http://mailman.cs.huji.ac.il/mailman/listinfo/linux-il
