seems OK, but I'm sending the output - maybe I'm missing something: pacmd list-sinks 1 sink(s) available. * index: 2 name: <auto_null> driver: <module-null-sink.c> flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY state: SUSPENDED suspend cause: IDLE priority: 1000 volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB balance 0.00 base volume: 65536 / 100% / 0.00 dB volume steps: 65537 muted: no current latency: 0.00 ms max request: 344 KiB max rewind: 344 KiB monitor source: 2 sample spec: s16le 2ch 44100Hz channel map: front-left,front-right Stereo used by: 0 linked by: 0 configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms module: 29 properties: device.description = "Dummy Output" device.class = "abstract" device.icon_name = "audio-card"
And with a bluetooth speaker connected: pacmd list-sinks 1 sink(s) available. * index: 3 name: <bluez_sink.F4_4E_FD_19_AE_B6.a2dp_sink> driver: <module-bluez5-device.c> flags: HARDWARE DECIBEL_VOLUME LATENCY state: SUSPENDED suspend cause: IDLE priority: 9050 volume: front-left: 93061 / 142% / 9.14 dB, front-right: 93061 / 142% / 9.14 dB balance 0.00 base volume: 65536 / 100% / 0.00 dB volume steps: 65537 muted: no current latency: 0.00 ms max request: 2 KiB max rewind: 0 KiB monitor source: 3 sample spec: s16le 2ch 44100Hz channel map: front-left,front-right Stereo used by: 0 linked by: 0 fixed latency: 39.51 ms card: 1 <bluez_card.F4_4E_FD_19_AE_B6> module: 30 properties: bluetooth.protocol = "a2dp_sink" device.description = "SENSOR S-1" device.string = "F4:4E:FD:19:AE:B6" device.api = "bluez" device.class = "sound" device.bus = "bluetooth" device.form_factor = "headset" bluez.path = "/org/bluez/hci0/dev_F4_4E_FD_19_AE_B6" bluez.class = "0x240404" bluez.alias = "SENSOR S-1" device.icon_name = "audio-headset-bluetooth" device.intended_roles = "phone" ports: headset-output: Headset (priority 0, latency offset 0 usec, available: unknown) properties: active port: <headset-output> On Thu, 10 Dec 2020 08:27:56 +0200 borissh1...@gmail.com wrote: > On Thursday, 10 December 2020 7:56:23 IST Shlomo Solomon wrote: > > I feel really stupid, but after hours of searching, I'm really > > lost. No idea what I'm missing. > > > > I had a nasty PBCAK bug with debian recently that might be the same > case for you, the default sink was sent to an inactive sink (muted). > > You can get your sinks by running pacmd list-sinks > > Check if that sink is set correctly to you, and is not muted (and > enabled ! ). > > > > > > > _______________________________________________ > Linux-il mailing list > Linux-il@cs.huji.ac.il > http://mailman.cs.huji.ac.il/mailman/listinfo/linux-il -- Shlomo Solomon http://the-solomons.net Claws Mail 3.17.5 - KDE Plasma 5.18.5 - Kubuntu 20.04 _______________________________________________ Linux-il mailing list Linux-il@cs.huji.ac.il http://mailman.cs.huji.ac.il/mailman/listinfo/linux-il