Hi Savitha, Looks like you over wrote the MBR (Master Boot Record) when you installed Linux -- that's why NT dies showing the infamous Blue Screen of Death. Well, Yours Truly had done the same when he installed RHL 6.1 the first time around. Please read the "NT OS Loader + Linux mini-HOWTO" available from various sources including Redhat.com (Pl. check the PCQ CD if it is avlbl there). You should install NT first and let it hog the MBR for itself. Then, install Linux and select the option to boot it from the Root Partition. Initially, you need to boot Linux using the boot floppy you create during the installation. (Set your BIOS option to check the FDD first). Later, as described in the above mini-HOWTO, you can use NTOSLOADER to boot either to NT or to Linux -- it is quite straight forward. You can also use any of the third-party boot managers like "Boot Magic" to choose your OS. Good luck! Regds, AK. --- A Savitha <[EMAIL PROTECTED]> wrote: > I'm having a problem installing windows > nt,dos,linux on a 16gb single > hard disk... > 2) linux and dos boots well, but when I boot nt it > gives me the startup > menu to start nt and a blue screen comes up which > tells > "Inaccesibe_boot_device" __________________________________________________ Do You Yahoo!? Send instant messages & get email alerts with Yahoo! Messenger. http://im.yahoo.com/ ----------------------------------------------------------------------- Check out the 'What to do before posting to the list' site for a list of things to try before posting. The site is at http://botsie.tripod.com/beforeposting/
