Subject: Compex RL100A Ethernet Card
10/100 PCI
Kernel version 2.2.14-12 (Zoot)
Full installation with Kernel source.
Reference :
To: [EMAIL PROTECTED], linux-india
<[EMAIL PROTECTED]>
Subject: [linux-delhi] Re: Compex RL100A Ethernet
card
From: S Chetan Kumar <[EMAIL PROTECTED]>
Date: Tue, 23 Mar 1999 12:37:26 0530 (IST)
cc: linux delhi
<[EMAIL PROTECTED]>
In-Reply-To: <[EMAIL PROTECTED]>
{ All modules were correctly loaded in
/lib/modules/2.2.14-12/net }
Cannot find rl100a.c or rl100a.o anywhere in my
system ( beneath the
/usr/src/linux tree )
1) Card is not detected by Set up
2) Card at IRQ 11.
3) Tried /sbin/modprobe net irq=11 ,d000, eth0
Message : modprobe: insmod irq=11 failed
{ or with ne2k-pci , tulip }
4) A message in the /proc/pci for the device
Bus=1, Device=5 , function=0
Ethernet Controller : Compex Unknown Device (rev
0 )
Vendor id=11f6 Device id=2011 Maxdevsel. Fast
back-to-back-Capable. IRQ=11. Master Capable.
Late ncy=208
Min Gnt=1.Max Lat=16 . I/O at 0xd000 [0xd001].
No Prefetchable 32 bit memmory at
0xdd000000[0xdd000000]
5) Shuts down eth0 normally
Shutting down eth0
[OK]
6) On startup prompts with message
Bringing up interface eth0 insmod :
/lib/modules/2.2.14-12/ne2k-pci.o
insmod eth0 initialization failed
[FAIL]
7) Machine works with Win9x with the following
configuration
IRQ=9 (shared with IRQ=9 for Intel 810 VGA
card) ; IO range 0xd000-do7f ;
Memory Base 0xdd000000- 0xdd00007f ; Memory
Range 000c8000 -000cffff
8) Tried network Card with Win type IRQ config as
well
---------------------------------------------
Get your free email for life at
www.mantramail.com
-----------------------------------------------------------------------
Check out the 'What to do before posting to the list' site
for a list of things to try before posting. The site is
at http://botsie.tripod.com/beforeposting/
