I have proceeded as advised for installing RH6.2 in PCQ and
www.exocore.com/linux/i810.
When I did X configuration through setup, I got auto recognition of
i810.
After installation, though conf.modules doesn't have agpgart line, lsmod
gave agpgart 17852 0. as I got the error,
gart allocate:can not allocate memory.
Then I added agpgart line as advised in conf.modules. Still the problem
remains.
Further in addition to above i also get the msg
-SVGA:PCI:intel unknown chipset(0x7121) rev3.
when I test X.
Further we have Samtron 55V monitor. Manual says its hsync is 30-55 and
vsync as 50-120.
No similar monitor gives this range. Even If I edit XF86Config for the
above modelines as specified in manual doesn't exists. Manual gives h
and v freq for particular resolution along with only clock freq.
# 640x400 @ 70 Hz, 31.5 kHz hsync
Modeline "640x400" 25.175 640 664 760 800 400 409 411 450
----------------------------------------
how to get other parameters as those underlined above.
If anybody has the same monitor with working X, kindly give the monitor
portion of XF86Config.
--
L.V.Gandhi
MECON RTC Complex Visakhapatnam 530020 India
Ph. 746717(O) 553169(R) 543122(F) [EMAIL PROTECTED]
http://www.poboxes.com/lvgandhi
-----------------------------------------------------------------------
For more information on the LIH mailing list see:
http://lists.linux-india.org/lists/LIH
