On Wed, Nov 08, 2000 at 04:00:45PM +0530, ChandraShekar wrote:
>Hi,
>
>How to configure DAT drives (scsi) under linux.
>The main aim is to use tar command to take regular backups.
No configuration is required. You have to only check whether during startup your DAT
drive is detected. During booting Linux automatically recognises most of the SCSI
devices. After that it is just one command
tar -cvf /dev/st0 if it is the first tape drive
or
tar -cvf /dev/st1 for the second tape drive.
Rajesh
----------------------------------------------
LIH is all for free speech. But it was created
for a purpose. Violations of the rules of
this list will result in stern action.
