My server was working fine, but I think due to some file deletion ( I
deleted /tmp ) startx command stop working. The error are shown below this
mail.
The computer show squid is working, but client computer can not connect to
server may be due to same error. I do not want to reinstall whole thing.
Can someone help me in solving this problem. I am using redhat 6.2
H. S. Rai
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
out put after startx command
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Script started on Wed Dec 27 09:41:15 2000
[xyz@civil161 xyz]$ startx
XFree86 Version 3.3.6 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 8 2000
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.5-22smp i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 1):
s3_savage, NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2,
RIVA ULTRA TNT2, RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED,
GeForce 256, GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i,
ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a,
ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100,
et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33,
gvga, r128, ati, sis86c201, sis86c202, sis86c205, sis86c215,
sis86c225, sis5597, sis5598, sis6326, sis530, sis620, sis300, sis630,
sis540, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl,
tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi,
tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660,
tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388,
cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985, cyber9397dvd,
blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428,
clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462,
clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541,
clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e,
cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200,
mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101, ali2228,
ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440,
video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek,
s3_virge, AP6422, AT24, AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097,
NM2160, NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545,
ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct69000,
ct64200, ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740,
i740_pci, Voodoo Banshee, Voodoo3, i810, i810-dc100, i810e, smi,
generic
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200
(**) Mouse: buttons: 3, 3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "Trident Microsystems|TGUI 9660/968x/968x"
(**) SVGA: Monitor ID: "My Monitor"
(--) SVGA: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
Warning: The directory "/usr/X11R6/lib/X11/fonts/TrueType" does not exist.
Entry deleted from font path.
(**) FontPath set to "unix/:-1"
(--) SVGA: PCI: Trident TGUI 96xx rev 211, Memory @ 0xe0000000, 0xe0400000
(--) Trident chipset version: 0xd3 (TGUI96xx)
(--) SVGA: BIOS reports Clock Control Bits 0x0
(--) SVGA: Detected a Trident 9680.
(--) SVGA: Revision 1.
(--) SVGA: Using Trident programmable clocks
(--) SVGA: chipset: tgui9680
(--) SVGA: videoram: 1024k
(**) SVGA: Using 8 bpp, Depth 8, Color weight: 666
(--) SVGA: Maximum allowed dot-clock: 135.000 MHz
(**) SVGA: Mode "800x600": mode clock = 50.000
(--) SVGA: Virtual resolution set to 800x600
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: Using Linear Frame Buffer at 0x0e0000000, Size 1MB
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Error: bad length in Geometry
> Output file "/var/tmp/server-0.xkm" removed
Errors from xkbcomp are not fatal to the X server
Couldn't load XKB keymap, falling back to pre-XKB keymap
_FontTransSocketUNIXConnect: Can't connect: errno = 111
failed to set default font path 'unix/:-1'
Fatal server error:
could not open default font 'fixed'
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
X connection to :0.0 broken (explicit kill or server shutdown).
[xyz@civil161 xyz]$ exit
Script done on Wed Dec 27 09:41:31 2000
----------------------------------------------
An alpha version of a web based tool to manage
your subscription with this mailing list is at
http://lists.linux-india.org/cgi-bin/mj_wwwusr
