Hi Zubin,
Do the following steps in order todial successfully through kppp.
1. Press the setup button.
2. CLik on the Modem Tab.
3. Click on the Modem Commands button
4. Look for the DAIL STRING field. You will have ATDT here
5. Change this to the following
A. If you have Pulse dialing, Then replace ATDT with ATX0DP
B. If you have Tone Dialing, Then replace ATDT with ATX0DT
The X0 is essential, as that switches off the modem detection feature for
kppp. This is a verified and tested procedure. so go ahead and implement
this.
The string is X0 (x zero) and not XO (X Oh), fine.
Let me know if this works.
Regards
Manik
-----Original Message-----
From: zubin kavarana [mailto:[EMAIL PROTECTED]]
Sent: Friday, June 01, 2001 1:58 PM
To: [EMAIL PROTECTED]
Subject: [LIH] dialing in to an indian isp
I have a suse 7.0 linux.I am trying to dial in to any indian isp using a GVC
33.6 external modem which linux detects.The problem is when i try to dial
using wave dil or kppp it says dial tone not found (dial tone definetly
there).How do isolve this+any other problems in dialing in.
------------------------------------------------------------
[EMAIL PROTECTED] -> http://silverchair.org/mail
a silverchair mailing list -> http://silverchair.org/AY2KList
_______________________________________________
linux-india-help mailing list
[EMAIL PROTECTED]
http://lists.sourceforge.net/lists/listinfo/linux-india-help
_______________________________________________
linux-india-help mailing list
[EMAIL PROTECTED]
http://lists.sourceforge.net/lists/listinfo/linux-india-help
