Hi,
I am using an interal modem (DAX) and I installed it
using the following instructions using the
followingfiles-
lib/pctel.o Installable modem driver
lib/control.a Relocatable object
forController module
lib/dsp.a Relocatable object for
DSPmodule
lib/hal.a Relocatable object for
HALmodule
lib/ptserial.a Relocatable object
forPTSERIAL module
src/module/Makefile Makefile for linking
allobjects
src/module/ptmodule.c Source file for linkingall
objects
Then i added a node -
mknod /dev/ttyS15 c 62 79 chgrp uucp /dev/ttyS15
chmod 666 /dev/ttyS15ln -s /dev/ttyS15 dev/modem
Then -
insmod pctel.o
As far as the next step goes the manual says -
_Setting up the Seyon Terminal_
To make sure modem driver is installed correctly, you
can run the application Seyon. This is an application
like Hyper Terminal that will allow you to make calls.
To run Seyon, click on the button with the letter �K�
on the task bar. A menu will pop up. Click on
Internet -> Seyon. If Terminal Emulator comes up and
you get a message �Modem is Available�, then the modem
driver is installed correctly. The Seyon Command
Center will appear on the bottom. Click on Set ->
Baud and select 115200 and close. In the terminal
window, try to dial a number.
Now what is this Seyon and where fo I get it ? Any
other application similar to Seyon ?
Basically ... is this the right procedure ? Anybody
who has done this installation please could you guide
me though.
Thanks.
Ajay
__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/
_______________________________________________
linux-india-help mailing list
[EMAIL PROTECTED]
http://lists.sourceforge.net/lists/listinfo/linux-india-help
