----- Original Message ----- From: "Mithun Bhattacharya" <[EMAIL PROTECTED]> To: "Pawan Dev" <[EMAIL PROTECTED]> Sent: Thursday, November 01, 2001 7:46 PM Subject: Re: [LIH] screen resoultion with trident 3dimage 975 AGP card
> > Hello, > > Has anyone managed to get screen resoultion of 1024x768 in RH linux 7.1 > > with Trident 3dimage 975 agp card? I used to have that resoultion in older > > version of red hat like 6.2 and 7.0, but now in 7.1 Xconfigurator,it shows > > my card as PCI card and though it automatically gets 1024x768, it is blurry. > > but it works fine in lower resoultion though. > I don't have a Trident these days but I definitely remember using it > with 7.1 I am on a Cirrus Logic right now - seems like your HSYNC VSYNC > might be the culprit - I am pretty sure Xconfigurator should be able to > recognize your card - cant say about your Monitor. > > Mithun Thanks for the reply. My configuration is as follows: Acer 54e 15" monitor (which is accepted by default by Xconfigurator) Trident AGP 3d image 975 card which is also accepted by Xconfigurator of 7.1 as pci card. In fact, i used to get 1024x768 resolution in high color by tweaking XF8Config file little bit. My previous XF86Config file had entry like this: # The Colour SVGA server Section "Screen" Driver "svga" # Use Device "Generic VGA" for Standard VGA 320x200x256 #Device "Generic VGA" Device "Trident 3DImage975 (generic)" Monitor "Acer 54e" DefaultColorDepth 32 Subsection "Display" Depth 32 Modes "640x480" "1024x768" ViewPort 0 0 EndSubsection EndSection By adding "1024x768" right after "640x480" , I was able to get 1024x768 after starting xserver into 640x480 and then switching into 1024x768 with ALT -CTRL-keypadPlus(+). But this method is not working in XF86 that comes with 7.1. _______________________________________________ linux-india-help mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/linux-india-help
