So men, here is the problem. In theory, and good analysis itself shall be appreciated.
And earlier version of OS had it all configured. The fast/wide SCSI disk was connected to the mainboard - which does not support fast/wide-scsi natively, by the way - through an adapter. The OS was upgraded and all the devices were detected, even the card which sits between the external disk and the mainboard and the driver for the same was loaded fine. Problem is that the HDDs attached to that do not get detected as HDDs at all. Or as any other device for that matter. They are powered on before the system comes up - and were working fine very well before the upgrade, the whole assembly. On first glance, what does it look like to you? Rohit ********************************************************* Disclaimer This message (including any attachments) contains confidential information intended for a specific individual and purpose, and is protected by law. If you are not the intended recipient, you should delete this message and are hereby notified that any disclosure, copying, or distribution of this message, or the taking of any action based on it, is strictly prohibited. ********************************************************* Visit us at http://www.mahindrabt.com _______________________________________________ linux-india-help mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/linux-india-help
