Have you tried searching for the machine using the Search->Find computer on the windows machines?
-Naren On Tue, 5 Feb 2002, amol g wrote: > Hi, > > I am facing a problem with Samba. I am unable to see > my Linux machine in Network Neighbourhood. The rest of > the machines are all 98 & NT. I have my smb.conf file > attached to this mail. > > Amol > > # This is the main Samba configuration file. You > should read the > # smb.conf(5) manual page in order to understand the > options listed > # here. Samba has a huge number of configurable > options (perhaps too > # many!) most of which are not shown in this example > # > # Any line which starts with a ; (semi-colon) or a # > (hash) > # is a comment and is ignored. In this example we will > use a # > # for commentry and a ; for parts of the config file > that you > # may wish to enable > # > # NOTE: Whenever you modify this file you should run > the command "testparm" > # to check that you have not many any basic syntactic > errors. > # > #======================= Global Settings > ===================================== > [global] > > # workgroup = NT-Domain-Name or Workgroup-Name > workgroup = VIJAY > > # server string is the equivalent of the NT > Description field > server string = Samba Server > > # This option is important for security. It allows you > to restrict > # connections to machines which are on your local > network. The > # following example restricts access to two C class > networks and > # the "loopback" interface. For more examples of the > syntax see > # the smb.conf man page > ; hosts allow = 200.200.1. 200.200.2. 127. > > # if you want to automatically load your printer list > rather > # than setting them up individually then you'll need > this > printcap name = /etc/printcap > load printers = yes > > # It should not be necessary to spell out the print > system type unless > # yours is non-standard. Currently supported print > systems include: > # bsd, sysv, plp, lprng, aix, hpux, qnx > printing = lprng > > # Uncomment this if you want a guest account, you must > add this to /etc/passwd > # otherwise the user "nobody" is used > ; guest account = pcguest > > # this tells Samba to use a separate log file for each > machine > # that connects > log file = /var/log/samba/%m.log > > # Put a capping on the size of the log files (in Kb). > max log size = 0 > > # Security mode. Most people will want user level > security. See > # security_level.txt for details. > security = user > # Use password server option only with security = > server or > # security = domain > password server = E60 > > # Password Level allows matching of _n_ characters of > the password for > # all combinations of upper and lower case. > ; password level = 8 > ; username level = 8 > > # You may wish to use password encryption. Please read > # ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba > documentation. > # Do not enable this option unless you have read those > documents > encrypt passwords = yes > smb passwd file = /etc/samba/smbpasswd > > # The following is needed to keep smbclient from > spouting spurious errors > # when Samba is built with support for SSL. > ssl CA certFile = > /usr/share/ssl/certs/ca-bundle.crt > > # The following are needed to allow password changing > from Windows to > # update the Linux sytsem password also. > # NOTE: Use these with 'encrypt passwords' and 'smb > passwd file' above. > # NOTE2: You do NOT need these to allow workstations > to change only > # the encrypted SMB passwords. They allow the > Unix password > # to be kept in sync with the SMB password. > ; unix password sync = Yes > ; passwd program = /usr/bin/passwd %u > ; passwd chat = *New*UNIX*password* %n\n > *ReType*new*UNIX*password* %n\n > *passwd:*all*authentication*tokens*updated*successfully* > > # Unix users can map to different SMB User names > ; username map = /etc/samba/smbusers > > # Using the following line enables you to customise > your configuration > # on a per machine basis. The %m gets replaced with > the netbios name > # of the machine that is connecting > ; include = /etc/samba/smb.conf.%m > > # Most people will find that this option gives better > performance. > # See speed.txt and the manual pages for details > socket options = TCP_NODELAY SO_RCVBUF=8192 > SO_SNDBUF=8192 > > # Configure Samba to use multiple interfaces > # If you have multiple network interfaces then you > must list them > # here. See the man page for details. > ; interfaces = 192.168.12.2/24 192.168.13.2/24 > > # Configure remote browse list synchronisation here > # request announcement to, or browse list sync from: > # a specific host or from / to a whole subnet (see > below) > ; remote browse sync = 192.168.3.25 192.168.5.255 > # Cause this host to announce itself to local subnets > here > ; remote announce = 192.168.1.255 192.168.2.44 > > # Browser Control Options: > # set local master to no if you don't want Samba to > become a master > # browser on your network. Otherwise the normal > election rules apply > ; local master = no > > # OS Level determines the precedence of this server in > master browser > # elections. The default value should be reasonable > ; os level = 33 > > # Domain Master specifies Samba to be the Domain > Master Browser. This > # allows Samba to collate browse lists between > subnets. Don't use this > # if you already have a Windows NT domain controller > doing this job > ; domain master = yes > > # Preferred Master causes Samba to force a local > browser election on startup > # and gives it a slightly higher chance of winning the > election > ; preferred master = yes > > # Enable this if you want Samba to be a domain logon > server for > # Windows95 workstations. > ; domain logons = yes > > # if you enable domain logons then you may want a > per-machine or > # per user logon script > # run a specific logon batch file per workstation > (machine) > ; logon script = %m.bat > # run a specific logon batch file per username > ; logon script = %U.bat > > # All NetBIOS names must be resolved to IP Addresses > # 'Name Resolve Order' allows the named resolution > mechanism to be specified > # the default order is "host lmhosts wins bcast". > "host" means use the unix > # system gethostbyname() function call that will use > either /etc/hosts OR > # DNS or NIS depending on the settings of > /etc/host.config, /etc/nsswitch.conf > # and the /etc/resolv.conf file. "host" therefore is > system configuration > # dependant. This parameter is most often of use to > prevent DNS lookups > # in order to resolve NetBIOS names to IP Addresses. > Use with care! > # The example below excludes use of name resolution > for machines that are NOT > # on the local network segment > # - OR - are not deliberately to be known via lmhosts > or via WINS. > name resolve order = wins lmhosts bcast > > # Windows Internet Name Serving Support Section: > # WINS Support - Tells the NMBD component of Samba to > enable it's WINS Server > wins support = yes > > # WINS Server - Tells the NMBD components of Samba to > be a WINS Client > # Note: Samba can be either a WINS Server, or a WINS > Client, but NOT both > ; wins server = w.x.y.z > > # WINS Proxy - Tells Samba to answer name resolution > queries on > # behalf of a non WINS capable client, for this to > work there must be > # at least one WINS Server on the network. The default > is NO. > ; wins proxy = yes > > # DNS Proxy - tells Samba whether or not to try to > resolve NetBIOS names > # via DNS nslookups. The built-in default for versions > 1.9.17 is yes, > # this has been changed in version 1.9.18 to no. > dns proxy = no > > # Case Preservation can be handy - system default is > _no_ > # NOTE: These can be set on a per share basis > ; preserve case = no > ; short preserve case = no > # Default case is normally upper case for all DOS > files > ; default case = lower > # Be very careful with case sensitivity - it can break > things! > ; case sensitive = no > > #============================ Share Definitions > ============================== > [homes] > comment = Home Directories > browseable = no > writable = yes > > # Un-comment the following and create the netlogon > directory for Domain Logons > ; [netlogon] > ; comment = Network Logon Service > ; path = /home/netlogon > ; guest ok = yes > ; writable = no > ; share modes = no > > > # Un-comment the following to provide a specific > roving profile share > # the default is to use the user's home directory > ;[Profiles] > ; path = /home/profiles > ; browseable = no > ; guest ok = yes > > > # NOTE: If you have a BSD-style print system there is > no need to > # specifically define each individual printer > [printers] > comment = All Printers > path = /var/spool/samba > browseable = no > # Set public = yes to allow user 'guest account' to > print > guest ok = no > printable = yes > > # This one is useful for people to share files > ;[tmp] > ; comment = Temporary file space > ; path = /tmp > ; read only = no > ; public = yes > > # This one is useful for people to share files on > Linux > [public] > comment = Temporary file space > path = /home/public > public = yes > writeable = yes > printable = no > > > # A publicly accessible directory, but read only, > except for people in > # the "staff" group > ;[public] > ; comment = Public Stuff > ; path = /home/samba > ; public = yes > ; writable = yes > ; printable = no > ; write list = @staff > > # Other examples. > # > # A private printer, usable only by fred. Spool data > will be placed in fred's > # home directory. Note that fred must have write > access to the spool directory, > # wherever it is. > ;[fredsprn] > ; comment = Fred's Printer > ; valid users = fred > ; path = /homes/fred > ; printer = freds_printer > ; public = no > ; printable = yes > > # A private directory, usable only by fred. Note that > fred requires write > # access to the directory. > ;[fredsdir] > ; comment = Fred's Service > ; path = /usr/somewhere/private > ; valid users = fred > ; public = no > ; writable = yes > ; printable = no > > # a service which has a different directory for each > machine that connects > # this allows you to tailor configurations to incoming > machines. You could > # also use the %u option to tailor it by user name. > # The %m gets replaced with the machine name that is > connecting. > ;[pchome] > ; comment = PC Directories > ; path = /usr/pc/%m > ; public = no > ; writable = yes > > # A publicly accessible directory, read/write to all > users. Note that all files > # created in the directory by users will be owned by > the default user, so > # any user with access can delete any other user's > files. Obviously this > # directory must be writable by the default user. > Another user could of course > # be specified, in which case all files would be owned > by that user instead. > ;[public] > ; path = /usr/somewhere/else/public > ; public = yes > ; only guest = yes > ; writable = yes > ; printable = no > > # The following two entries demonstrate how to share a > directory so that two > # users can place files there that will be owned by > the specific users. In this > # setup, the directory should be writable by both > users and should have the > # sticky bit set on it to prevent abuse. Obviously > this could be extended to > # as many users as required. > ;[myshare] > ; comment = Mary's and Fred's stuff > ; path = /usr/somewhere/shared > ; valid users = mary fred > ; public = no > ; writable = yes > ; printable = no > ; create mask = 0765 > > > > > __________________________________________________ > Do You Yahoo!? > Send FREE Valentine eCards with Yahoo! Greetings! > http://greetings.yahoo.com > > _______________________________________________ > linux-india-help mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/linux-india-help > _______________________________________________ linux-india-help mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/linux-india-help
