hi all,
I use a socket program and i get the ip 172.16.1.25 intead of 172.16.1.115
in the other machine. The out puts of ifconfig, and ip are given below. But
i am able to connect to the ip 172.16.1.115.
why it caches the old ip and behaves differently. Have missed something?
Most of the time its not taking the ip which i am assigning but am able to
connect with this ip though.
[root@qmail logu]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:00:01:35:27:86
inet addr:172.16.1.115 Bcast:172.16.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:13397 errors:0 dropped:0 overruns:0 frame:0
TX packets:2543 errors:0 dropped:0 overruns:0 carrier:0
collisions:3 txqueuelen:100
RX bytes:1245310 (1.1 Mb) TX bytes:177448 (173.2 Kb)
Interrupt:10 Base address:0xe400
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
[root@qmail logu]# ip addr show
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 100
link/ether 00:00:01:35:27:86 brd ff:ff:ff:ff:ff:ff
inet 172.16.1.115/24 brd 172.16.1.255 scope global eth0
inet 172.16.1.25/16 brd 172.16.1.255 scope global eth0
_______________________________________________
linux-india-help mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/linux-india-help
