>Use "route -n" command. Route is taking time to search DNS. 

>why dont u do as follows

>#/etc/init.d/network stop
>#ifconfig eth0  192.9.201.32 netmask 255.255.255.0 up
>#ping -b 192.9.201.0
>#route add default gw <ur gateway IP>
>#ping <some outside network ip>

Hi,
<problem>
Not able to ping computer in my network
</problem> 

I have done the above thing. It removed my loopback device lo.
I was not able to ping my own ip(192.9.201.32)
I added the gateway 192.9.201.134, but still I am able to computer outside
or within my network. Later I added lo I was able to my ip. 

Right now I am om my PCq Linux which work fine is on my same box. 

tarangini:~# mount /dev/hda1 /mnt/ddrive  (mounting caldera root partition)
tarangini:~# cat /mnt/ddrive/etc/sysconfig/network                          
NETWORKING=yes                                                              
HOSTNAME=tarangini                                                          
GATEWAY=192.9.201.134                                                       
GATEWAYDEV="eth0"                                                           
IF_LIST='lo eth tr sl ppp'                                                  
FORWARD_IPV4="yes" 

tarangini:~# cat /etc/sysconfig/network   (of pcq linux )
NETWORKING=yes
HOSTNAME="tarangini"
GATEWAY="192.9.201.134"
GATEWAYDEV="eth0"
IPX="no"
IPXINTERNALNETNUM="0"
IPXINTERNALNODENUM="0"
IPXAUTOPRIMARY="on"
IPXAUTOFRAME="on"
FORWARD_IPV4="yes" 

tarangini:~# cat /mnt/ddrive/etc/sysconfig/network-scripts/ifcfg-eth0
#!/bin/sh
#>>Device type: ethernet
#>>>Variable declarations:
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
IPADDR=192.9.201.32
NETMASK=255.255.255.0
NETWORK=192.9.201.0
BROADCAST=192.9.201.255
GATEWAY=192.9.201.134
#>>>End variable declarations
#BASIC=no 

tarangini:~# cat /etc/sysconfig/network-scripts/ifcfg-eth0  //Pcq
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
IPADDR=192.9.201.32
NETMASK=255.255.255.0
GATEWAY=192.9.201.134 

Following is the output of route -n in caldera
tarangini:~# cat /mnt/ddrive/root/route.txt
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use 
Iface
192.9.201.0     *               255.255.255.0   U     0      0        0 eth0
127.0.0.0       *               255.0.0.0       U     0      0        0 lo
0.0.0.0         192.9.201.134   0.0.0.0         UG    1      0        0 eth0 

Following is the output of route -n in pCQ Linux
tarangini:~# route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use 
Iface
192.9.201.0     0.0.0.0         255.255.255.0   U     0      0        0 eth0
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo
0.0.0.0         192.9.201.134   0.0.0.0         UG    0      0        0 eth0 

tarangini:~# cat /mnt/ddrive/root/ifconfig.txt
eth0      Link encap:Ethernet  HWaddr 00:80:C8:34:91:32
       inet addr:192.9.201.32  Bcast:192.9.201.255  Mask:255.255.255.0
       UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
       RX packets:0 errors:0 dropped:0 overruns:0 frame:0
       TX packets:0 errors:111 dropped:0 overruns:0 carrier:222
       collisions:0 

lo        Link encap:Local Loopback
       inet addr:127.0.0.1  Mask:255.0.0.0
       UP LOOPBACK RUNNING  MTU:16436  Metric:1
       RX packets:77 errors:0 dropped:0 overruns:0 frame:0
       TX packets:77 errors:0 dropped:0 overruns:0 carrier:0
       collisions:0 

tarangini:~# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:80:C8:34:91:32
       inet addr:192.9.201.32  Bcast:192.9.201.255  Mask:255.255.255.0
       UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
       RX packets:9369 errors:11 dropped:0 overruns:0 frame:24
       TX packets:1093 errors:0 dropped:0 overruns:0 carrier:0
       collisions:28 txqueuelen:100
       Interrupt:12 Base address:0xe800 

lo        Link encap:Local Loopback
       inet addr:127.0.0.1  Mask:255.0.0.0
       UP LOOPBACK RUNNING  MTU:16436  Metric:1
       RX packets:19 errors:0 dropped:0 overruns:0 frame:0
       TX packets:19 errors:0 dropped:0 overruns:0 carrier:0
       collisions:0 txqueuelen:0 

This is some thing strange, My conf file of caldera is same as of pcq
but i not able to ping. 

HELP!! 

Regards
Liyju Janardhan


-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
linux-india-help mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/linux-india-help

Reply via email to