On Sat, Aug 24, 2002 at 02:17:39AM +0530, Sam Varughese poked the keyboard with a
stick and composed:
> hello
>
> I needed help on how to create more number of terminal
> that is
> ctrl-1 --- 1
> ctrl-2 --- 2
> : :
> : :
> : :
> ctrl-6 --- 6
> ctrl-7 --- 7 (GUI)
>
> This is the default for Redhat.
>
> What I need to know is how to create lets a ctrl-8
> Also I have seen that sometime the setting change that that gui is at ctrl-8
> What the configuration files for these terminals
> Also could somebody explain the difference between tty and pty
>
> Sam V
>
--End Quoted Message--
for first question, see LOST below
-sdg-
--
:
####[ Linux One Stanza Tip (LOST) ]###########################
Sub : Additional consoles LOST #017
To add more consoles to the default 6, edit /etc/inittab. To
lines looking like this:
6:23:respawn:/sbin/getty tty6 | Do not cross 11 because
| the last free tty is
... append something like: | needed by X. Anyway,
7:23:respawn:/sbin/getty tty7 | for most boxes, 10 is
8:23:respawn:/sbin/getty tty8 | good enough
####<[EMAIL PROTECTED]>###################################
:
-------------------------------------------------------
This sf.net email is sponsored by: OSDN - Tired of that same old
cell phone? Get a new here for FREE!
https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
_______________________________________________
linux-india-help mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/linux-india-help
