On Tue, Sep 10, 2002 at 08:53:26AM +0530, Rajesh K.R. wrote: > > I am running a RedHat 7.1 (Kernal 2.4.3-12) with the parti- > tions mounted as follows: > /boot /dev/hda1 53Mb > / /dev/hda2 8370Mb > /home /dev/hda3 9844Mb > > The utilisation of hda2 was only 25% till two days back. But > after a power failure, suddenly I find that the usage is 98%. [snipped] > ---end quoted text---
The most common cause after power failures is file system corr- uption. Please run e2fsck from a rescue disk or any stand alone distro (like tomsrtbt). Since your / is to be checked it should not be mounted. HTH ... and crossing fingers. Bish -- : ####[ GNU/Linux One Stanza Tip (LOST) ]####################### Sub : Large memory and LILO boot LOST #233 There may be problems in LILO automatically detecting memory larger than 64 mb, in which case, the following are needed: a) to lilo.conf add: 'append = "mem=255M"' (for 256 mb RAM) b) run: 'lilo -v' and re-initialise boot loader ####<[EMAIL PROTECTED]>#################################### : ------------------------------------------------------- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390 _______________________________________________ linux-india-help mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/linux-india-help
