On Fri, Sep 20, 2002 at 08:33:42AM +0530, little wrote:
>
> i am getting an error during installation if LILO that its
> above the limit of 1024 cylinders and use lba32.
>
---end quoted text---
This could be because of either of these situations:
a) Your lilo.conf is not configured for lba32
b) You are faced with the 1024-voodoo, which is a problem with
old bioses and older versions of LILO. If yours is an old
machine, this is a physical limitation of LILO and cannot
be overcome ... You need to dual boot through an alternate
method like loadlin (for 9x and ME) or through boot.ini (if
on NT/2k/XP) ... or try grub.
HTH
Bish
--
:
####[ GNU/Linux One Stanza Tip (LOST) ]#######################
Sub : Copying from one CD to another LOST #303
#dd if=/dev/cdrom of=datacd.iso
#cdrecord -vv -eject -pad dev=0,0,0 speed=N datacd.iso
[Note: Replace dev=0,0,0 with the output of cdrecord -scanbus
for your system. Replace N in speed= with 2,4,8 depending on
the speed of your CD-writer. Also add -J switch if Joliet ext
are needed for M$ CDs]
####<[EMAIL PROTECTED]>######################################
:
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
linux-india-help mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/linux-india-help
