Hi
I'm having RH 7.3 in my machine. Recently I got a Iomega Predator, CD-RW which
is connected to the USB port of my machine. The device is detected and in the hardware
browser, CD ROM section, I can see the info for Iomega CD-RW and the device pointing
to /dev/scd0. As I read from CD Recording How to, I did a
# cdrecord -scanbus
Which gave the proper output showing that the device is recognized.
Then I tried to burn an iso image what I was having using the command
# cdrecord -v -dummy speed=2 dev=0,0,0 image.iso
But after issuing the above command, finally i got the following error.
#--------------------------------------------------------------------#
cdrecord: Input/output error. read disk info: scsi sendcmd: no error
CDB: 51 00 00 00 00 00 00 00 04 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x
0
Sense flags: Blk 0 (not valid)
cmd finished after 0.319s timeout 240s
cdrecord: Cannot get disk type.
#--------------------------------------------------------------------#
I'm stuck. Please give me valuable suggestions for setting up the same in my machine.
regards
Vinu Chandran
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
linux-india-help mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/linux-india-help
