Hello, I just got a Kobian VIA P4M266 motherboard with via8233 oboard audio. I compiled the alsa (0.9rc5) and installed it. When I try to install the snd-via82xx module I get the following error:
(Sorry for the line width.) # /etc/init.d/alsa start Starting ALSA sound driver (version 0.9.0rc5):ALSA ../alsa-kernel/pci/via82xx.c:350: codec_ready: codec 0 is not ready [0x1000000] ALSA ../alsa-kernel/pci/via82xx.c:350: codec_ready: codec 0 is not ready [0x1800000] ALSA ../alsa-kernel/pci/via82xx.c:350: codec_ready: codec 0 is not ready [0x1800000] ALSA ../alsa-kernel/pci/via82xx.c:350: codec_ready: codec 0 is not ready [0x1800000] ALSA ../alsa-kernel/pci/via82xx.c:350: codec_ready: codec 0 is not ready [0x1800000] PCI: Setting latency timer of device 00:11.5 to 64 ALSA ../alsa-kernel/pci/via82xx.c:350: codec_ready: codec 0 is not ready [0x1000000] ALSA ../alsa-kernel/pci/via82xx.c:350: codec_ready: codec 0 is not ready [0x1000000] ALSA ../alsa-kernel/pci/via82xx.c:350: codec_ready: codec 0 is not ready [0x1fc0000] ALSA ../alsa-kernel/pci/via82xx.c:350: codec_ready: codec 0 is not ready [0x1fc0000] ALSA ../alsa-kernel/pci/via82xx.c:350: codec_ready: codec 0 is not ready [0x1fc0000] ALSA ../alsa-kernel/pci/via82xx.c:350: codec_ready: codec 0 is not ready [0x1fc0000] ALSA ../alsa-kernel/pci/via82xx.c:350: codec_ready: codec 0 is not ready [0x1fe0000] ALSA ../alsa-kernel/pci/via82xx.c:350: codec_ready: codec 0 is not ready [0x1fe0000] ALSA ../alsa-kernel/pci/via82xx.c:350: codec_ready: codec 0 is not ready [0x1fe0000] ALSA ../alsa-kernel/pci/via82xx.c:350: codec_ready: codec 0 is not ready [0x1fe0000] ALSA ../../alsa-kernel/pci/ac97/ac97_codec.c:1537: AC'97 0:0 access is not valid [0xffffffff], removing mixer. via82xx. Restoring ALSA mixer settings...done. What can be wrong? My /etc/modules.conf has all the necessary stuff. alias char-major-116 snd alias snd-card-0 snd-via82xx options snd-via82xx snd_index=0 snd_id="VIA8233" alias sound-slot-0 snd-card-0 alias char-major-14 soundcore alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss alias sound-service-0-12 snd-pcm-oss Can someone give me some pointers for getting this to work? BTW, where does the mixer settings get stored? Earlier, it was /etc/asound.state. It is no longer there. If it helps, I am running kernel 2.4.19. As an aside, I ran the setup program for windows. It says, AC97 Codec not enabled in BIOS or not found. I checked the BIOS and it was enabled. But, using the windows hardware detection, I could install the driver and get the sound. Is there something wrong with the board itself? Regards, -- Sridhar M.A. "How should I know if it works? That's what beta testers are for. I only coded it." (Attributed to Linus Torvalds, somewhere in a posting) ------------------------------------------------------- This SF.net email is sponsored by: Get the new Palm Tungsten T handheld. Power & Color in a compact size! http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0002en _______________________________________________ linux-india-help mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/linux-india-help
