Dr. which is your network card ? and what is your connection to the network ? do you have a hub or switch? what make again try disconnecting the system from network and run for some time with a tail -f running on the messages file.
I personally doubt a flaky crimping on the network ----- Original Message ----- From: "Dr. Sharukh K. R. Pavri." <[EMAIL PROTECTED]> To: "Linux India Help" <[EMAIL PROTECTED]> Sent: Saturday, December 21, 2002 11:47 PM Subject: [LIH]eth0 errors > I am getting these errors in /var/log/mesages. What do they mean ? > ----------------------------- > Dec 21 23:39:30 shiroy kernel: NETDEV WATCHDOG: eth0: transmit timed out > Dec 21 23:39:30 shiroy kernel: eth0: Setting 100mbps half-duplex based on > auto-negotiated partner ability ffff. > Dec 21 23:39:42 shiroy kernel: NETDEV WATCHDOG: eth0: transmit timed out > Dec 21 23:39:42 shiroy kernel: eth0: Setting 100mbps full-duplex based on > auto-negotiated partner ability 45e1. > Dec 21 23:39:44 shiroy kernel: eth0: Too much work at interrupt, > IntrStatus=0x0001. > ----------------------------- > > The last line is repeated a couple of hundred times and then the machine > becomes very sluggish. I can't even log in at another virtual console. > > regards, > > Sharukh. > -- > Dr. Sharukh K. R. Pavri Homeopath and Linux Enthusiast. > Mumbai, India. http://www.pavri.net/ > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > _______________________________________________ > linux-india-help mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/linux-india-help > ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ linux-india-help mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/linux-india-help
