Kernel : Linux 2.4.9-e.25summit
O/S : Red Hat Enterprise Linux Advance Server
________________________________________________________________________
From:
Virat
Gohil
<[EMAIL PROTECTED]>
Reply-To:
[EMAIL PROTECTED]
To:
[EMAIL PROTECTED]
Subject:
Re:
[LIH]bogomips / TSC Skew / Apic -- Error
Date:
Thu, 7 Aug
2003
13:21:45
+0530
what kernel and OS r u using?
Regards,
Virat
----- Original Message -----
From: "S K Goel" <[EMAIL PROTECTED]>
To: "linux-india" <[EMAIL PROTECTED]>
Sent: Wednesday, August 06, 2003 5:30 PM
Subject: [LIH]bogomips / TSC Skew / Apic -- Error
> hi,
>
>
> I am enclosing herewith my /var/log/dmesg file.
>
> My system have 8 Xeon CPU with hyper thread enabled and 16 GB
RAM.
>
> I am seeing the following problems :-
>
> 1. The Bogomips is very low
> 2. The TSC Skew Error
> 3. Unexpectrd IO-Apic
>
>
> is any one have any idea about these
> .
> however my system is working without any problem.
>
>
> [ S K Goel ]
>
>
> 0x33])
> INT_SRC_OVR (bus[0] irq[0x8] global_irq[0x8] polarity[0x3]
trigger[0x1])
> INT_SRC_OVR (bus[0] irq[0xe] global_irq[0xe] polarity[0x1]
trigger[0x0])
> INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x24] polarity[0x0]
> trigger[0x0])
> LAPIC_NMI (acpi_id[0x0000] polarity[0x0] trigger[0x0]
lint[0x1])
> LAPIC_NMI (acpi_id[0x0001] polarity[0x0] trigger[0x0]
lint[0x1])
> LAPIC_NMI (acpi_id[0x0002] polarity[0x0] trigger[0x0]
lint[0x1])
> LAPIC_NMI (acpi_id[0x0003] polarity[0x0] trigger[0x0]
lint[0x1])
> LAPIC_NMI (acpi_id[0x0004] polarity[0x0] trigger[0x0]
lint[0x1])
> LAPIC_NMI (acpi_id[0x0005] polarity[0x0] trigger[0x0]
lint[0x1])
> LAPIC_NMI (acpi_id[0x0006] polarity[0x0] trigger[0x0]
lint[0x1])
> LAPIC_NMI (acpi_id[0x0007] polarity[0x0] trigger[0x0]
lint[0x1])
> LAPIC_NMI (acpi_id[0x0008] polarity[0x0] trigger[0x0]
lint[0x1])
> LAPIC_NMI (acpi_id[0x0009] polarity[0x0] trigger[0x0]
lint[0x1])
> LAPIC_NMI (acpi_id[0x000a] polarity[0x0] trigger[0x0]
lint[0x1])
> LAPIC_NMI (acpi_id[0x000b] polarity[0x0] trigger[0x0]
lint[0x1])
> LAPIC_NMI (acpi_id[0x000c] polarity[0x0] trigger[0x0]
lint[0x1])
> LAPIC_NMI (acpi_id[0x000d] polarity[0x0] trigger[0x0]
lint[0x1])
> LAPIC_NMI (acpi_id[0x000e] polarity[0x0] trigger[0x0]
lint[0x1])
> LAPIC_NMI (acpi_id[0x000f] polarity[0x0] trigger[0x0]
lint[0x1])
> 16 CPUs total
> Local APIC address fee00000
> init.c:148: bad pte c0004ef0(00000000dffbf163).
> init.c:148: bad pte c0004ef0(00000000dffbf163).
> ACPI table found: SRAT v1 [IBM SERVIGIL 0.4096]
> Enabling the CPU's according to the ACPI table
> Intel MultiProcessor Specification v1.4
> Virtual Wire compatibility mode.
> OEM ID: IBM ENSW Product ID: VIGIL SMP APIC at: 0xFEE00000
> I/O APIC #14 Version 17 at 0xFEC00000.
> I/O APIC #13 Version 17 at 0xFEC01000.
> Enabling APIC mode: Physical. Using 2 I/O APICs
> Processors: 16
> Kernel command line: ro root=/dev/sda1
> Initializing CPU#0
> Summit chipset: Starting Cyclone Clock.
> init.c:148: bad pte c0004ee8(00000000feb00173).
> init.c:148: bad pte c0004ee8(00000000f0c05173).
> init.c:148: bad pte c0004ee8(00000000f0c05173).
> Detected 1496.925 MHz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 198.65 BogoMIPS
> Memory: 16476192k/17301504k available (2002k kernel code,
816720k
> reserved, 129k data, 248k init, 15859416k highmem)
> Dentry-cache hash table entries: 524288 (order: 10, 4194304
bytes)
> Inode-cache hash table entries: 524288 (order: 10, 4194304
bytes)
> Mount-cache hash table entries: 524288 (order: 10, 4194304
bytes)
> Buffer-cache hash table entries: 1048576 (order: 10, 4194304
bytes)
> Page-cache hash table entries: 524288 (order: 10, 4194304
bytes)
> CPU: Before vendor init, caps: 3febfbff 00000000 00000000,
vendor = 0
> CPU: L1 I cache: 12K, L1 D cache: 8K
> CPU: L2 cache: 512K
> CPU: L3 cache: 1024K
> CPU: Physical Processor ID: 0
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU: After vendor init, caps: 3febfbff 00000000 00000000
00000000
> CPU: After generic, caps: 3febfbff 00000000 00000000
00000000
> CPU: Common caps: 3febfbff 00000000 00000000
00000000
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> IBM machine detected. Enabling interrupts during APM calls.
> mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
> mtrr: detected mtrr type: Intel
> CPU: Before vendor init, caps: 3febfbff 00000000 00000000,
vendor = 0
> CPU: L1 I cache: 12K, L1 D cache: 8K
> CPU: L2 cache: 512K
> CPU: L3 cache: 1024K
> CPU: Physical Processor ID: 0
> Intel machine check reporting enabled on CPU#0.
> CPU: After vendor init, caps: 3febfbff 00000000 00000000
00000000
> CPU: After generic, caps: 3febfbff 00000000 00000000
00000000
> CPU: Common caps: 3febfbff 00000000 00000000
00000000
> CPU0: Intel(R) XEON(TM) MP CPU 1.50GHz stepping 02
> per-CPU timeslice cutoff: 1462.91 usecs.
> task migration cache decay timeout: 10 msecs.
> enabled ExtINT on CPU#0
> Leaving ESR disabled.
> Booting processor 1/2 eip 2000
> Initializing CPU#1
> masked ExtINT on CPU#1
> Leaving ESR disabled.
> Calibrating delay loop... 199.47 BogoMIPS
> CPU: Before vendor init, caps: 3febfbff 00000000 00000000,
vendor = 0
> CPU: L1 I cache: 12K, L1 D cache: 8K
> CPU: L2 cache: 512K
> CPU: L3 cache: 1024K
> CPU: Physical Processor ID: 1
> Intel machine check reporting enabled on CPU#1.
> CPU: After vendor init, caps: 3febfbff 00000000 00000000
00000000
> CPU: After generic, caps: 3febfbff 00000000 00000000
00000000
> CPU: Common caps: 3febfbff 00000000 00000000
00000000
> CPU1: Intel(R) XEON(TM) MP CPU 1.50GHz stepping 02
> Booting processor 2/16 eip 2000
> Initializing CPU#2
> masked ExtINT on CPU#2
> Leaving ESR disabled.
> Calibrating delay loop... 199.47 BogoMIPS
> CPU: Before vendor init, caps: 3febfbff 00000000 00000000,
vendor = 0
> CPU: L1 I cache: 12K, L1 D cache: 8K
> CPU: L2 cache: 512K
> CPU: L3 cache: 1024K
> CPU: Physical Processor ID: 2
> Intel machine check reporting enabled on CPU#2.
> CPU: After vendor init, caps: 3febfbff 00000000 00000000
00000000
> CPU: After generic, caps: 3febfbff 00000000 00000000
00000000
> CPU: Common caps: 3febfbff 00000000 00000000
00000000
> CPU2: Intel(R) XEON(TM) MP CPU 1.50GHz stepping 02
> Booting processor 3/18 eip 2000
> Initializing CPU#3
> masked ExtINT on CPU#3
> Leaving ESR disabled.
> Calibrating delay loop... 199.47 BogoMIPS
> CPU: Before vendor init, caps: 3febfbff 00000000 00000000,
vendor = 0
> CPU: L1 I cache: 12K, L1 D cache: 8K
> CPU: L2 cache: 512K
> CPU: L3 cache: 1024K
> CPU: Physical Processor ID: 3
> Intel machine check reporting enabled on CPU#3.
> CPU: After vendor init, caps: 3febfbff 00000000 00000000
00000000
> CPU: After generic, caps: 3febfbff 00000000 00000000
00000000
> CPU: Common caps: 3febfbff 00000000 00000000
00000000
> CPU3: Intel(R) XEON(TM) MP CPU 1.50GHz stepping 02
> Booting processor 4/32 eip 2000
> Initializing CPU#4
> masked ExtINT on CPU#4
> Leaving ESR disabled.
> Calibrating delay loop... 199.47 BogoMIPS
> CPU: Before vendor init, caps: 3febfbff 00000000 00000000,
vendor = 0
> CPU: L1 I cache: 12K, L1 D cache: 8K
> CPU: L2 cache: 512K
> CPU: L3 cache: 1024K
> CPU: Physical Processor ID: 8
> Intel machine check reporting enabled on CPU#4.
> CPU: After vendor init, caps: 3febfbff 00000000 00000000
00000000
> CPU: After generic, caps: 3febfbff 00000000 00000000
00000000
> CPU: Common caps: 3febfbff 00000000 00000000
00000000
> CPU4: Intel(R) XEON(TM) MP CPU 1.50GHz stepping 02
> Booting processor 5/34 eip 2000
> Initializing CPU#5
> masked ExtINT on CPU#5
> Leaving ESR disabled.
> Calibrating delay loop... 199.47 BogoMIPS
> CPU: Before vendor init, caps: 3febfbff 00000000 00000000,
vendor = 0
> CPU: L1 I cache: 12K, L1 D cache: 8K
> CPU: L2 cache: 512K
> CPU: L3 cache: 1024K
> CPU: Physical Processor ID: 9
> Intel machine check reporting enabled on CPU#5.
> CPU: After vendor init, caps: 3febfbff 00000000 00000000
00000000
> CPU: After generic, caps: 3febfbff 00000000 00000000
00000000
> CPU: Common caps: 3febfbff 00000000 00000000
00000000
> CPU5: Intel(R) XEON(TM) MP CPU 1.50GHz stepping 02
> Booting processor 6/48 eip 2000
> Initializing CPU#6
> masked ExtINT on CPU#6
> Leaving ESR disabled.
> Calibrating delay loop... 199.47 BogoMIPS
> CPU: Before vendor init, caps: 3febfbff 00000000 00000000,
vendor = 0
> CPU: L1 I cache: 12K, L1 D cache: 8K
> CPU: L2 cache: 512K
> CPU: L3 cache: 1024K
> CPU: Physical Processor ID: 10
> Intel machine check reporting enabled on CPU#6.
> CPU: After vendor init, caps: 3febfbff 00000000 00000000
00000000
> CPU: After generic, caps: 3febfbff 00000000 00000000
00000000
> CPU: Common caps: 3febfbff 00000000 00000000
00000000
> CPU6: Intel(R) XEON(TM) MP CPU 1.50GHz stepping 02
> Booting processor 7/50 eip 2000
> Initializing CPU#7
> masked ExtINT on CPU#7
> Leaving ESR disabled.
> Calibrating delay loop... 199.47 BogoMIPS
> CPU: Before vendor init, caps: 3febfbff 00000000 00000000,
vendor = 0
> CPU: L1 I cache: 12K, L1 D cache: 8K
> CPU: L2 cache: 512K
> CPU: L3 cache: 1024K
> CPU: Physical Processor ID: 11
> Intel machine check reporting enabled on CPU#7.
> CPU: After vendor init, caps: 3febfbff 00000000 00000000
00000000
> CPU: After generic, caps: 3febfbff 00000000 00000000
00000000
> CPU: Common caps: 3febfbff 00000000 00000000
00000000
> CPU7: Intel(R) XEON(TM) MP CPU 1.50GHz stepping 02
> Booting processor 8/1 eip 2000
> Initializing CPU#8
> masked ExtINT on CPU#8
> Leaving ESR disabled.
> Calibrating delay loop... 1.61 BogoMIPS
> CPU: Before vendor init, caps: 3febfbff 00000000 00000000,
vendor = 0
> CPU: L1 I cache: 12K, L1 D cache: 8K
> CPU: L2 cache: 512K
> CPU: L3 cache: 1024K
> CPU: Physical Processor ID: 0
> Intel machine check reporting enabled on CPU#8.
> CPU: After vendor init, caps: 3febfbff 00000000 00000000
00000000
> CPU: After generic, caps: 3febfbff 00000000 00000000
00000000
> CPU: Common caps: 3febfbff 00000000 00000000
00000000
> CPU8: Intel(R) XEON(TM) MP CPU 1.50GHz stepping 02
> Booting processor 9/3 eip 2000
> Initializing CPU#9
> masked ExtINT on CPU#9
> Leaving ESR disabled.
> Calibrating delay loop... 199.47 BogoMIPS
> CPU: Before vendor init, caps: 3febfbff 00000000 00000000,
vendor = 0
> CPU: L1 I cache: 12K, L1 D cache: 8K
> CPU: L2 cache: 512K
> CPU: L3 cache: 1024K
> CPU: Physical Processor ID: 1
> Intel machine check reporting enabled on CPU#9.
> CPU: After vendor init, caps: 3febfbff 00000000 00000000
00000000
> CPU: After generic, caps: 3febfbff 00000000 00000000
00000000
> CPU: Common caps: 3febfbff 00000000 00000000
00000000
> CPU9: Intel(R) XEON(TM) MP CPU 1.50GHz stepping 02
> Booting processor 10/17 eip 2000
> Initializing CPU#10
> masked ExtINT on CPU#10
> Leaving ESR disabled.
> Calibrating delay loop... 199.47 BogoMIPS
> CPU: Before vendor init, caps: 3febfbff 00000000 00000000,
vendor = 0
> CPU: L1 I cache: 12K, L1 D cache: 8K
> CPU: L2 cache: 512K
> CPU: L3 cache: 1024K
> CPU: Physical Processor ID: 2
> Intel machine check reporting enabled on CPU#10.
> CPU: After vendor init, caps: 3febfbff 00000000 00000000
00000000
> CPU: After generic, caps: 3febfbff 00000000 00000000
00000000
> CPU: Common caps: 3febfbff 00000000 00000000
00000000
> CPU10: Intel(R) XEON(TM) MP CPU 1.50GHz stepping 02
> Booting processor 11/19 eip 2000
> Initializing CPU#11
> masked ExtINT on CPU#11
> Leaving ESR disabled.
> Calibrating delay loop... 199.47 BogoMIPS
> CPU: Before vendor init, caps: 3febfbff 00000000 00000000,
vendor = 0
> CPU: L1 I cache: 12K, L1 D cache: 8K
> CPU: L2 cache: 512K
> CPU: L3 cache: 1024K
> CPU: Physical Processor ID: 3
> Intel machine check reporting enabled on CPU#11.
> CPU: After vendor init, caps: 3febfbff 00000000 00000000
00000000
> CPU: After generic, caps: 3febfbff 00000000 00000000
00000000
> CPU: Common caps: 3febfbff 00000000 00000000
00000000
> CPU11: Intel(R) XEON(TM) MP CPU 1.50GHz stepping 02
> Booting processor 12/33 eip 2000
> Initializing CPU#12
> masked ExtINT on CPU#12
> Leaving ESR disabled.
> Calibrating delay loop... 199.47 BogoMIPS
> CPU: Before vendor init, caps: 3febfbff 00000000 00000000,
vendor = 0
> CPU: L1 I cache: 12K, L1 D cache: 8K
> CPU: L2 cache: 512K
> CPU: L3 cache: 1024K
> CPU: Physical Processor ID: 8
> Intel machine check reporting enabled on CPU#12.
> CPU: After vendor init, caps: 3febfbff 00000000 00000000
00000000
> CPU: After generic, caps: 3febfbff 00000000 00000000
00000000
> CPU: Common caps: 3febfbff 00000000 00000000
00000000
> CPU12: Intel(R) XEON(TM) MP CPU 1.50GHz stepping 02
> Booting processor 13/35 eip 2000
> Initializing CPU#13
> masked ExtINT on CPU#13
> Leaving ESR disabled.
> Calibrating delay loop... 199.47 BogoMIPS
> CPU: Before vendor init, caps: 3febfbff 00000000 00000000,
vendor = 0
> CPU: L1 I cache: 12K, L1 D cache: 8K
> CPU: L2 cache: 512K
> CPU: L3 cache: 1024K
> CPU: Physical Processor ID: 9
> Intel machine check reporting enabled on CPU#13.
> CPU: After vendor init, caps: 3febfbff 00000000 00000000
00000000
> CPU: After generic, caps: 3febfbff 00000000 00000000
00000000
> CPU: Common caps: 3febfbff 00000000 00000000
00000000
> CPU13: Intel(R) XEON(TM) MP CPU 1.50GHz stepping 02
> Booting processor 14/49 eip 2000
> Initializing CPU#14
> masked ExtINT on CPU#14
> Leaving ESR disabled.
> Calibrating delay loop... 199.47 BogoMIPS
> CPU: Before vendor init, caps: 3febfbff 00000000 00000000,
vendor = 0
> CPU: L1 I cache: 12K, L1 D cache: 8K
> CPU: L2 cache: 512K
> CPU: L3 cache: 1024K
> CPU: Physical Processor ID: 10
> Intel machine check reporting enabled on CPU#14.
> CPU: After vendor init, caps: 3febfbff 00000000 00000000
00000000
> CPU: After generic, caps: 3febfbff 00000000 00000000
00000000
> CPU: Common caps: 3febfbff 00000000 00000000
00000000
> CPU14: Intel(R) XEON(TM) MP CPU 1.50GHz stepping 02
> Booting processor 15/51 eip 2000
> Initializing CPU#15
> masked ExtINT on CPU#15
> Leaving ESR disabled.
> Calibrating delay loop... 199.47 BogoMIPS
> CPU: Before vendor init, caps: 3febfbff 00000000 00000000,
vendor = 0
> CPU: L1 I cache: 12K, L1 D cache: 8K
> CPU: L2 cache: 512K
> CPU: L3 cache: 1024K
> CPU: Physical Processor ID: 11
> Intel machine check reporting enabled on CPU#15.
> CPU: After vendor init, caps: 3febfbff 00000000 00000000
00000000
> CPU: After generic, caps: 3febfbff 00000000 00000000
00000000
> CPU: Common caps: 3febfbff 00000000 00000000
00000000
> CPU15: Intel(R) XEON(TM) MP CPU 1.50GHz stepping 02
> Total of 16 processors activated (2992.92 BogoMIPS).
> cpu_sibling_map[0] = 8
> cpu_sibling_map[1] = 9
> cpu_sibling_map[2] = 10
> cpu_sibling_map[3] = 11
> cpu_sibling_map[4] = 12
> cpu_sibling_map[5] = 13
> cpu_sibling_map[6] = 14
> cpu_sibling_map[7] = 15
> cpu_sibling_map[8] = 0
> cpu_sibling_map[9] = 1
> cpu_sibling_map[10] = 2
> cpu_sibling_map[11] = 3
> cpu_sibling_map[12] = 4
> cpu_sibling_map[13] = 5
> cpu_sibling_map[14] = 6
> cpu_sibling_map[15] = 7
> ENABLING IO-APIC IRQs
> Setting 14 in the phys_id_present_map
> ...changing IO-APIC physical APIC ID to 14 ... ok.
> Setting 13 in the phys_id_present_map
> ...changing IO-APIC physical APIC ID to 13 ... ok.
> init IO_APIC IRQs
> IO-APIC (apicid-pin) 14-2, 14-3, 14-4, 14-5, 14-7, 14-9,
14-10, 14-11,
> 14-15, 14-17, 14-20, 14-21, 14-22, 14-23, 14-24, 14-25, 14-26,
14-27,
> 14-28, 14-29, 14-30, 14-31, 14-32, 14-33, 14-34, 14-35, 14-36,
14-37,
> 14-38, 14-43, 14-44, 14-45, 14-46, 14-47, 14-48, 14-49, 14-50,
13-24,
> 13-25, 13-26, 13-27, 13-28, 13-29, 13-30, 13-31, 13-32, 13-33,
13-34,
> 13-35, 13-36, 13-37, 13-38, 13-39, 13-40, 13-41, 13-42, 13-43,
13-44,
> 13-45, 13-46, 13-47, 13-48, 13-49, 13-50 not connected.
> ..TIMER: vector=0x31 pin1=0 pin2=-1
> number of MP IRQ sources: 38.
> number of IO-APIC #14 registers: 51.
> number of IO-APIC #13 registers: 51.
> testing the IO APIC.......................
>
> IO APIC #14......
> .... register #00: 0E000000
> ....... : physical APIC id: 0E
> .... register #01: 00320011
> ....... : max redirection entries: 0032
> WARNING: unexpected IO-APIC, please mail
> to [EMAIL PROTECTED]
> ....... : IO APIC version: 0011
> .... register #02: 00000000
> ....... : arbitration: 00
> .... IRQ redirection table:
> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
> 00 022 02 0 0 0 0 0 0 0 31
> 01 002 02 0 0 0 0 0 0 0 39
> 02 000 00 1 0 0 0 0 0 0 00
> 03 000 00 1 0 0 0 0 0 0 00
> 04 000 00 1 0 0 0 0 0 0 00
> 05 000 00 1 0 0 0 0 0 0 00
> 06 033 03 0 0 0 0 0 0 0 41
> 07 000 00 1 0 0 0 0 0 0 00
> 08 001 01 0 0 0 1 0 0 0 49
> 09 000 00 1 0 0 0 0 0 0 00
> 0a 000 00 1 0 0 0 0 0 0 00
> 0b 000 00 1 0 0 0 0 0 0 00
> 0c 021 01 0 0 0 0 0 0 0 51
> 0d 023 03 0 0 0 0 0 0 0 59
> 0e 031 01 0 0 0 0 0 0 0 61
> 0f 000 00 1 0 0 0 0 0 0 00
> 10 000 00 1 1 0 1 0 0 0 69
> 11 000 00 1 0 0 0 0 0 0 00
> 12 010 00 1 1 0 1 0 0 0 71
> 13 012 02 1 1 0 1 0 0 0 79
> 14 000 00 1 0 0 0 0 0 0 00
> 15 000 00 1 0 0 0 0 0 0 00
> 16 000 00 1 0 0 0 0 0 0 00
> 17 000 00 1 0 0 0 0 0 0 00
> 18 000 00 1 0 0 0 0 0 0 00
> 19 000 00 1 0 0 0 0 0 0 00
> 1a 000 00 1 0 0 0 0 0 0 00
> 1b 000 00 1 0 0 0 0 0 0 00
> 1c 000 00 1 0 0 0 0 0 0 00
> 1d 000 00 1 0 0 0 0 0 0 00
> 1e 000 00 1 0 0 0 0 0 0 00
> 1f 000 00 1 0 0 0 0 0 0 00
> 20 000 00 1 0 0 0 0 0 0 00
> 21 000 00 1 0 0 0 0 0 0 00
> 22 000 00 1 0 0 0 0 0 0 00
> 23 000 00 1 0 0 0 0 0 0 00
> 24 000 00 1 0 0 0 0 0 0 00
> 25 000 00 1 0 0 0 0 0 0 00
> 26 000 00 1 0 0 0 0 0 0 00
> 27 032 02 1 1 0 1 0 0 0 81
> 28 001 01 1 1 0 1 0 0 0 89
> 29 003 03 1 1 0 1 0 0 0 91
> 2a 011 01 1 1 0 1 0 0 0 99
> 2b 000 00 1 0 0 0 0 0 0 00
> 2c 000 00 1 0 0 0 0 0 0 00
> 2d 000 00 1 0 0 0 0 0 0 00
> 2e 000 00 1 0 0 0 0 0 0 00
> 2f 000 00 1 0 0 0 0 0 0 00
> 30 000 00 1 0 0 0 0 0 0 00
> 31 000 00 1 0 0 0 0 0 0 00
> 32 000 00 1 0 0 0 0 0 0 00
>
> IO APIC #13......
> .... register #00: 0D000000
> ....... : physical APIC id: 0D
> .... register #01: 00320011
> ....... : max redirection entries: 0032
> WARNING: unexpected IO-APIC, please mail
> to [EMAIL PROTECTED]
> ....... : IO APIC version: 0011
> .... register #02: 00000000
> ....... : arbitration: 00
> .... IRQ redirection table:
> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
> 00 012 02 1 1 0 1 0 0 0 A1
> 01 020 00 1 1 0 1 0 0 0 A9
> 02 022 02 1 1 0 1 0 0 0 B1
> 03 030 00 1 1 0 1 0 0 0 B9
> 04 032 02 1 1 0 1 0 0 0 C1
> 05 001 01 1 1 0 1 0 0 0 C9
> 06 003 03 1 1 0 1 0 0 0 D1
> 07 011 01 1 1 0 1 0 0 0 D9
> 08 013 03 1 1 0 1 0 0 0 E1
> 09 021 01 1 1 0 1 0 0 0 E9
> 0a 023 03 1 1 0 1 0 0 0 32
> 0b 031 01 1 1 0 1 0 0 0 3A
> 0c 033 03 1 1 0 1 0 0 0 42
> 0d 000 00 1 1 0 1 0 0 0 4A
> 0e 002 02 1 1 0 1 0 0 0 52
> 0f 010 00 1 1 0 1 0 0 0 5A
> 10 012 02 1 1 0 1 0 0 0 62
> 11 020 00 1 1 0 1 0 0 0 6A
> 12 022 02 1 1 0 1 0 0 0 72
> 13 030 00 1 1 0 1 0 0 0 7A
> 14 032 02 1 1 0 1 0 0 0 82
> 15 001 01 1 1 0 1 0 0 0 8A
> 16 003 03 1 1 0 1 0 0 0 92
> 17 011 01 1 1 0 1 0 0 0 9A
> 18 000 00 1 0 0 0 0 0 0 00
> 19 000 00 1 0 0 0 0 0 0 00
> 1a 000 00 1 0 0 0 0 0 0 00
> 1b 000 00 1 0 0 0 0 0 0 00
> 1c 000 00 1 0 0 0 0 0 0 00
> 1d 000 00 1 0 0 0 0 0 0 00
> 1e 000 00 1 0 0 0 0 0 0 00
> 1f 000 00 1 0 0 0 0 0 0 00
> 20 000 00 1 0 0 0 0 0 0 00
> 21 000 00 1 0 0 0 0 0 0 00
> 22 000 00 1 0 0 0 0 0 0 00
> 23 000 00 1 0 0 0 0 0 0 00
> 24 000 00 1 0 0 0 0 0 0 00
> 25 000 00 1 0 0 0 0 0 0 00
> 26 000 00 1 0 0 0 0 0 0 00
> 27 000 00 1 0 0 0 0 0 0 00
> 28 000 00 1 0 0 0 0 0 0 00
> 29 000 00 1 0 0 0 0 0 0 00
> 2a 000 00 1 0 0 0 0 0 0 00
> 2b 000 00 1 0 0 0 0 0 0 00
> 2c 000 00 1 0 0 0 0 0 0 00
> 2d 000 00 1 0 0 0 0 0 0 00
> 2e 000 00 1 0 0 0 0 0 0 00
> 2f 000 00 1 0 0 0 0 0 0 00
> 30 000 00 1 0 0 0 0 0 0 00
> 31 000 00 1 0 0 0 0 0 0 00
> 32 000 00 1 0 0 0 0 0 0 00
> IRQ to pin mappings:
> IRQ0 -> 0:0
> IRQ1 -> 0:1
> IRQ6 -> 0:6
> IRQ8 -> 0:8
> IRQ12 -> 0:12
> IRQ13 -> 0:13
> IRQ14 -> 0:14
> IRQ16 -> 0:16
> IRQ18 -> 0:18
> IRQ19 -> 0:19
> IRQ39 -> 0:39
> IRQ40 -> 0:40
> IRQ41 -> 0:41
> IRQ42 -> 0:42
> IRQ51 -> 1:0
> IRQ52 -> 1:1
> IRQ53 -> 1:2
> IRQ54 -> 1:3
> IRQ55 -> 1:4
> IRQ56 -> 1:5
> IRQ57 -> 1:6
> IRQ58 -> 1:7
> IRQ59 -> 1:8
> IRQ60 -> 1:9
> IRQ61 -> 1:10
> IRQ62 -> 1:11
> IRQ63 -> 1:12
> IRQ64 -> 1:13
> IRQ65 -> 1:14
> IRQ66 -> 1:15
> IRQ67 -> 1:16
> IRQ68 -> 1:17
> IRQ69 -> 1:18
> IRQ70 -> 1:19
> IRQ71 -> 1:20
> IRQ72 -> 1:21
> IRQ73 -> 1:22
> IRQ74 -> 1:23
> .................................... done.
> Using local APIC timer interrupts.
> calibrating APIC timer ...
> ..... CPU clock speed is 1496.9175 MHz.
> ..... host bus clock speed is 99.7944 MHz.
> cpu: 0, clocks: 997944, slice: 58702
> CPU0<T0:997936,T1:939232,D:2,S:58702,C:997944>
> cpu: 8, clocks: 997944, slice: 58702
> cpu: 10, clocks: 997944, slice: 58702
> cpu: 11, clocks: 997944, slice: 58702
> cpu: 3, clocks: 997944, slice: 58702
> cpu: 1, clocks: 997944, slice: 58702
> cpu: 9, clocks: 997944, slice: 58702
> cpu: 2, clocks: 997944, slice: 58702
> cpu: 6, clocks: 997944, slice: 58702
> cpu: 7, clocks: 997944, slice: 58702
> cpu: 12, clocks: 997944, slice: 58702
> cpu: 14, clocks: 997944, slice: 58702
> cpu: 15, clocks: 997944, slice: 58702
> cpu: 4, clocks: 997944, slice: 58702
> cpu: 13, clocks: 997944, slice: 58702
> cpu: 5, clocks: 997944, slice: 58702
> CPU1<T0:997936,T1:880512,D:20,S:58702,C:997944>
> CPU2<T0:997936,T1:821808,D:22,S:58702,C:997944>
> CPU3<T0:997936,T1:763120,D:8,S:58702,C:997944>
> CPU4<T0:997936,T1:704416,D:10,S:58702,C:997944>
> CPU5<T0:997936,T1:645696,D:28,S:58702,C:997944>
> CPU6<T0:997936,T1:587008,D:14,S:58702,C:997944>
> CPU7<T0:997936,T1:528304,D:16,S:58702,C:997944>
> CPU8<T0:997936,T1:469616,D:2,S:58702,C:997944>
> CPU9<T0:997936,T1:410912,D:4,S:58702,C:997944>
> CPU10<T0:997936,T1:352192,D:22,S:58702,C:997944>
> CPU11<T0:997936,T1:293504,D:8,S:58702,C:997944>
> CPU12<T0:997936,T1:234800,D:10,S:58702,C:997944>
> CPU13<T0:997936,T1:176080,D:28,S:58702,C:997944>
> CPU14<T0:997936,T1:117392,D:14,S:58702,C:997944>
> CPU15<T0:997936,T1:58704,D:0,S:58702,C:997944>
> checking TSC synchronization across CPUs:
> BIOS BUG: CPU#0 improperly initialized, has 8626578 usecs TSC
skew!
> FIXED.
> BIOS BUG: CPU#1 improperly initialized, has 8626578 usecs TSC
skew!
> FIXED.
> BIOS BUG: CPU#2 improperly initialized, has 8626579 usecs TSC
skew!
> FIXED.
> BIOS BUG: CPU#3 improperly initialized, has 8626578 usecs TSC
skew!
> FIXED.
> BIOS BUG: CPU#4 improperly initialized, has -8626579 usecs TSC
skew!
> FIXED.
> BIOS BUG: CPU#5 improperly initialized, has -8626579 usecs TSC
skew!
> FIXED.
> BIOS BUG: CPU#6 improperly initialized, has -8626579 usecs TSC
skew!
> FIXED.
> BIOS BUG: CPU#7 improperly initialized, has -8626579 usecs TSC
skew!
> FIXED.
> BIOS BUG: CPU#8 improperly initialized, has 8626583 usecs TSC
skew!
> FIXED.
> BIOS BUG: CPU#9 improperly initialized, has 8626578 usecs TSC
skew!
> FIXED.
> BIOS BUG: CPU#10 improperly initialized, has 8626579 usecs TSC
skew!
> FIXED.
> BIOS BUG: CPU#11 improperly initialized, has 8626578 usecs TSC
skew!
> FIXED.
> BIOS BUG: CPU#12 improperly initialized, has -8626579 usecs
TSC skew!
> FIXED.
> BIOS BUG: CPU#13 improperly initialized, has -8626579 usecs
TSC skew!
> FIXED.
> BIOS BUG: CPU#14 improperly initialized, has -8626579 usecs
TSC skew!
> FIXED.
> BIOS BUG: CPU#15 improperly initialized, has -8626579 usecs
TSC skew!
> FIXED.
> PCI: PCI BIOS revision 2.10 entry at 0xfd30d, last bus=11
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> PCI: Discovered peer bus 01
> PCI: Discovered peer bus 02
> PCI: Discovered peer bus 05
> PCI: Discovered peer bus 07
> PCI: Discovered peer bus 09
> PCI->APIC IRQ transform: (B0,I3,P0) -> 39
> PCI->APIC IRQ transform: (B0,I4,P0) -> 16
> PCI->APIC IRQ transform: (B0,I5,P3) -> 18
> PCI->APIC IRQ transform: (B0,I5,P3) -> 18
> PCI->APIC IRQ transform: (B1,I3,P0) -> 40
> PCI->APIC IRQ transform: (B1,I3,P1) -> 41
> PCI->APIC IRQ transform: (B1,I4,P0) -> 42
> PCI->APIC IRQ transform: (B2,I1,P0) -> 51
> PCI->APIC IRQ transform: (B5,I4,P0) -> 71
> PCI->APIC IRQ transform: (B7,I3,P0) -> 67
> PCI: Enabling Via external APIC routing
> PCI: Via IRQ fixup for 00:05.2, from 11 to 2
> PCI: Via IRQ fixup for 00:05.3, from 11 to 2
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
> apm: BIOS not found.
> mxt_scan_bios: enter
> Starting kswapd v1.8
> bigpage subsystem: allocated 0 bigpages (=0MB).
> allocated 256 pages and 256 bhs reserved for the highmem
bounces
> VFS: Diskquotas version dquot_6.5.0 initialized
> aio_setup: num_physpages = 1081344
> aio_setup: sizeof(struct page) = 68
> pty: 2048 Unix98 ptys configured
> Serial driver version 5.05c (2001-07-08) with MANY_PORTS
MULTIPORT
> SHARE_IRQ SERIAL_PCI ISAPNP enabled
> Real Time Clock Driver v1.10e
> block: queued sectors max/low 10968957kB/10837885kB, 8192
slots per
> queue
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024
blocksize
> Uniform Multi-Platform E-IDE driver Revision: 6.31
> ide: Assuming 33MHz PCI bus speed for PIO modes; override with
idebus=xx
> VP_IDE: IDE controller on PCI bus 00 dev 29
> VP_IDE: chipset revision 6
> VP_IDE: not 100% native mode: will probe irqs later
> ide: Assuming 33MHz PCI bus speed for PIO modes; override with
idebus=xx
> VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on
pci00:05.1
> ide0: BM-DMA at 0x0700-0x0707, BIOS settings: hda:pio,
hdb:pio
> ide1: BM-DMA at 0x0708-0x070f, BIOS settings: hdc:pio,
hdd:pio
> hda: LG CD-ROM CRN-8245B, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a National Semiconductor PC87306
> md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: ... autorun DONE.
> pci_hotplug: PCI Hot Plug PCI Core version: 0.3
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> IP: routing cache hash table of 262144 buckets, 2048Kbytes
> TCP: Hash tables configured (established 524288 bind 65536)
> Linux IP multicast router 0.06 plus PIM-SM
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> RAMDISK: Compressed image found at block 0
> Freeing initrd memory: 481k freed
> VFS: Mounted root (ext2 filesystem).
> SCSI subsystem driver Revision: 1.00
> (scsi0) <Adaptec AIC-7899 Ultra 160/m SCSI host adapter> found
at PCI
> 1/3/0
> (scsi0) Wide Channel A, SCSI ID=7, 32/255 SCBs
> (scsi0) Downloading sequencer code... 396 instructions
downloaded
> (scsi1) <Adaptec AIC-7899 Ultra 160/m SCSI host adapter> found
at PCI
> 1/3/1
> (scsi1) Wide Channel B, SCSI ID=7, 32/255 SCBs
> (scsi1) Downloading sequencer code... 396 instructions
downloaded
> (scsi2) <Adaptec AIC-7892 Ultra 160/m SCSI host adapter> found
at PCI
> 7/3/0
> (scsi2) Wide Channel, SCSI ID=7, 32/255 SCBs
> (scsi2) Downloading sequencer code... 396 instructions
downloaded
> scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI)
5.2.5/5.2.0
> <Adaptec AIC-7899 Ultra 160/m SCSI host adapter>
> scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI)
5.2.5/5.2.0
> <Adaptec AIC-7899 Ultra 160/m SCSI host adapter>
> scsi2 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI)
5.2.5/5.2.0
> <Adaptec AIC-7892 Ultra 160/m SCSI host adapter>
> blk: queue d29da218, I/O limit 4095Mb (mask 0xffffffff)
> blk: queue d29da218, I/O limit 4095Mb (mask 0xffffffff)
> blk: queue d29da218, I/O limit 4095Mb (mask 0xffffffff)
> Vendor: IBM Model: ULTRIUM-TD1 Rev: 25D4
> Type: Sequential-Access ANSI SCSI
revision: 03
> blk: queue f5dfa818, I/O limit 4095Mb (mask 0xffffffff)
> scsi3 : IBM PCI ServeRAID 6.00.26 <ServeRAID 4Mx>
> Vendor: IBM Model: SERVERAID Rev: 1.00
> Type: Direct-Access ANSI SCSI
revision: 02
> Vendor: IBM Model: SERVERAID Rev: 1.00
> Type: Direct-Access ANSI SCSI
revision: 02
> Vendor: IBM Model: SERVERAID Rev: 1.00
> Type: Processor ANSI SCSI
revision: 02
> Vendor: IBM Model: GNHv1 S2 Rev: 0
> Type: Processor ANSI SCSI
revision: 02
> Vendor: IBM Model: EXP300 S160 Rev: D014
> Type: Processor ANSI SCSI
revision: 03
> Attached scsi disk sda at scsi3, channel 0, id 0, lun 0
> Attached scsi disk sdb at scsi3, channel 0, id 1, lun 0
> SCSI device sda: 71096320 512-byte hdwr sectors (36401 MB)
> Partition check:
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
> SCSI device sdb: 573489152 512-byte hdwr sectors (293626 MB)
> sdb: sdb1 sdb2
> Journalled Block Device driver loaded
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> Freeing unused kernel memory: 248k freed
> Adding Swap: 1024120k swap-space (priority -1)
> usb.c: registered new driver usbdevfs
> usb.c: registered new driver hub
> usb-uhci.c: $Revision: 1.259 $ time 17:47:15 Jun 6 2003
> usb-uhci.c: High bandwidth mode enabled
> usb-uhci.c: USB UHCI at I/O 0x1880, IRQ 18
> usb-uhci.c: Detected 2 ports
> usb.c: new USB bus registered, assigned bus number 1
> hub.c: USB hub found
> hub.c: 2 ports detected
> usb-uhci.c: USB UHCI at I/O 0x18a0, IRQ 18
> usb-uhci.c: Detected 2 ports
> usb.c: new USB bus registered, assigned bus number 2
> hub.c: USB hub found
> hub.c: 2 ports detected
> usb-uhci.c: v1.251:USB Universal Host Controller Interface
driver
> EXT3 FS 2.4-0.9.11, 3 Oct 2001 on sd(8,1), internal journal
> kjournald starting. Commit interval 5 seconds
> EXT3 FS 2.4-0.9.11, 3 Oct 2001 on sd(8,2), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS 2.4-0.9.11, 3 Oct 2001 on sd(8,6), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS 2.4-0.9.11, 3 Oct 2001 on sd(8,5), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS 2.4-0.9.11, 3 Oct 2001 on sd(8,7), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS 2.4-0.9.11, 3 Oct 2001 on sd(8,17), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS 2.4-0.9.11, 3 Oct 2001 on sd(8,18), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> st: Version 20010812, bufsize 32768, wrt 30720, max init. bufs
4, s/g
> segs 16
> Attached scsi tape st0 at scsi2, channel 0, id 5, lun 0
>
-------------------------------------------------------
This SF.Net email sponsored by: Free pre-built ASP.NET sites including
Data Reports, E-commerce, Portals, and Forums are available now.
Download today and enter to win an XBOX or Visual Studio .NET.
http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01
_______________________________________________
linux-india-help mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/linux-india-help
