Hi:
I am unable to get the CRT monitor to simultaneously display
what is on my laptop LCD screen!
I will appreciate inputs towards setting up display
on both the LCD and CRT monitor.
The investigation details and technical information
is provided below.
The following approaches were tried:
0.
Approach:
use the display toggle key Fn-F5 (from Acer documentation)
in text mode.
Result:
The toggle key Fn-F5 has no affect.
1.
Approach:
use the display toggle key Fn-F5 (from Acer documentation)
when XFree86 server is running
Result:
The toggle key Fn-F5 has no affect.
2.
Approach:
Plug the CRT monitor cable to the laptop port before booting
the laptop.
Result:
On booting the laptop, the CRT monitor is detected
and the XWindows is displayed on CRT monitor.
The LCD panel is blank.
The toggle key Fn-F5 has no affect.
3.
Approach:
Plug the CRT monitor cable after the laptop is booted up
Result:
LCD Display active. The CRT monitor is blank.
On starting XFree86 server, XWindows is started and
displayed on LCD panel.
The CRT monitor continues to be blank.
The toggle key Fn-F5 has no affect.
The relevant technical details are as follows:
1. system setup information
Display Units
Operating System
XFree86 server info
2. video card information based on PCI probe
3. XF86Config file
System Setup
------------------------
Acer TravelMate 242FX Laptop
with DualView capability (1024x768 XGA)
Display Units
. Acer LCD Display Panel
1024x768 resolution
HorizSync 31.5 - 48.5
VertRefresh 40.0 - 70.0
. LG StudioWorks 520Si (External CRT Monitor)
Generic Non-Interlaced SVGA, 1024x768 @ 60Hz
HorizSync 31.5 - 48.5
VertRefresh 55.5 - 60.5
Operating System
RedHat Linux 9
XFree86 Version 4.3.0
(Red Hat Linux release: 4.3.0-2)
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20-3bigmem i686 [ELF]
Build Date: 27 February 2003
Build Host: porky.devel.redhat.com
Module Loader present
OS Kernel: Linux version 2.4.20-8
(gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5))
------------------------
Video Card Information
------------------------
Bus 0, device 2, function 0:
VGA compatible controller: PCI device 8086:3582 (Intel Corp.) (rev 2).
IRQ 5.
Prefetchable 32 bit memory at 0xe8000000 [0xefffffff].
Non-prefetchable 32 bit memory at 0xe0000000 [0xe007ffff].
I/O at 0x1800 [0x1807].
Bus 0, device 2, function 1:
Display controller: PCI device 8086:3582 (Intel Corp.) (rev 2).
Prefetchable 32 bit memory at 0xf0000000 [0xf7ffffff].
Non-prefetchable 32 bit memory at 0xe0080000 [0xe00fffff].
------------------------
/etc/X11/XF86Config file
------------------------
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "dbe"
Load "dri"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "xtrap"
Load "speedo"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Acer"
ModelName "Generic Laptop Display Panel 1024x768"
HorizSync 31.5 - 48.5
VertRefresh 40.0 - 70.0
Option "dpms"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "LG StudioWorks 520Si"
ModelName "External Monitor or Projector"
HorizSync 31.5 - 48.5
VertRefresh 55.5 - 60.5
EndSection
Section "Device"
Identifier "Videocard0"
Driver "i810"
VendorName "Intel Corp."
BoardName "852GM/852GME/855GM/855GME Chipset Graphics Controller"
BusID "PCI:0:2:0"
VideoRam 16384
Screen 0
EndSection
Section "Device"
Option "Display" "Mirror"
Identifier "Videocard1"
Driver "i810"
VendorName "Intel Corp."
BoardName "852GM/852GME/855GM/855GME Chipset Graphics Controller"
BusID "PCI:0:2:1"
VideoRam 16384
Screen 1
EndSection
Section "Screen"
Identifier "Screen_LCD"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen_CRT"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 1 "Screen_LCD"
Screen 0 "Screen_CRT"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
------------------------
Thanks for your time.
thanks
Saifi.
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
linux-india-help mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/linux-india-help
