SuriBabu forced the electrons to say:
> How can i mount the SCSI cdrom drive and SCSI dat tape drive on my linuxbox
> (redhat 6.1)?.
> My tape drive is HP C1599A and CDROM drive is tosibha TXM5401D1.
You need to know the name of your SCSI controller. Once you have identified
it, you have to load the appropriate module. After this, you can mount your
SCSI drives as usual (mount -t ext2 /dev/sda1 /mnt/scsi or whatever).
To figure out the name of the card, look in /proc/pci. You will probably find
an entry like (quoting from mine)
PCI devices found:
Bus 0, device 12, function 0:
SCSI storage controller: Initio Corp 360 P (rev 2).
Medium devsel. IRQ 5. Master Capable. Latency=64.
I/O at 0x6c00 [0x6c01].
Non-prefetchable 32 bit memory at 0xe4008000 [0xe4008000].
Binand
PS: If you could me mail me personally the contents of your
/proc/bus/pci/devices, then I have a program here that can identify the card.
--
The prompt for all occasions:
export PS1="F:\$(pwd | tr '/[a-z]' '\134\134[A-Z]')> "
--------------- Binand Raj S. ([EMAIL PROTECTED])
--------------------------------------------------------------------------
LI is all for free speech, but this list was created for a purpose --
to help popularise Linux in India. If your messages are counterproductive
to that purpose, your privileges to submit messages can and will be revoked.
