Ping. Any objections to this version? Thanks, Seth
On Fri, Jun 29, 2012 at 01:22:18PM -0500, Seth Forshee wrote: > The touchpad on the Acer Aspire One D250 will report out of range values > in the extreme lower portion of the touchpad. These appear as abrupt > changes in the values reported by the hardware from very low values to > very high values, which can cause unexpected vertical jumps in the > position of the mouse pointer. > > What seems to be happening is that the value is wrapping to a two's > compliment negative value of higher resolution than the 13-bit value > reported by the hardware, with the high-order bits being truncated. The > safest way to deal with this is to clamp any out of bounds values to the > minimum or maximum value for the axis. > > Distinguishing between positive and negative is problematic, since we > lack definitive sign information in the value reported by the hardware. > The approach taken here is to split the difference between the maximum > legitimate value for the axis and the maximum possible value that the > hardware can report, treating values greater than this number as > negative and all other values as positive. This can be tweaked later if > hardware is found that operates outside of these parameters. > > BugLink: http://bugs.launchpad.net/bugs/1001251 > Cc: [email protected] > Cc: Daniel Kurtz <[email protected]> > Signed-off-by: Seth Forshee <[email protected]> > --- > drivers/input/mouse/synaptics.c | 27 +++++++++++++++++++++++++++ > 1 file changed, 27 insertions(+) > > diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c > index c6d9869..698f1b8 100644 > --- a/drivers/input/mouse/synaptics.c > +++ b/drivers/input/mouse/synaptics.c > @@ -40,6 +40,10 @@ > * Note that newer firmware allows querying device for maximum useable > * coordinates. > */ > +#define XMIN 0 > +#define XMAX 6143 > +#define YMIN 0 > +#define YMAX 6143 > #define XMIN_NOMINAL 1472 > #define XMAX_NOMINAL 5472 > #define YMIN_NOMINAL 1408 > @@ -555,6 +559,29 @@ static int synaptics_parse_hw_state(const unsigned char > buf[], > hw->right = (buf[0] & 0x02) ? 1 : 0; > } > > + /* > + * Some hardware is known to wrap negative on the y axis, > + * providing the low-order bits of a higher resolution negative > + * number as a 13-bit unsigned value. No hardware is known to > + * give out-of-bounds values on the high end, but since we're > + * dealing with unspecified behavior we take a conservative > + * approach to handling the out of bounds values. > + * > + * Clamp out of bounds values to the minimum or maximum value > + * for the axis. Use the midpoint between the maximum axis > + * value and maximum possible reported value as the dividing > + * line between positive and negative values. > + */ > + if (hw->x > ((1 << 13) + XMAX) / 2) > + hw->x = XMIN; > + else if (hw->x > XMAX) > + hw->x = XMAX; > + > + if (hw->y > ((1 << 13) + YMAX) / 2) > + hw->y = YMIN; > + else if (hw->y > YMAX) > + hw->y = YMAX; > + > return 0; > } > > -- > 1.7.9.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-input" in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
