Hi Bo,
On Friday 17 August 2012 03:33 PM, Bo Shen wrote:
> This patch enable the qt1070 device tree support
>
> If using device tree, the node of qt1070 looks like
> i2c@0 { // this is an example
> status = "okay"; // Enable i2c master
> qt1070@1b {
> compatible = "atmel,qt1070"; // FDT device id
> reg = <0x1b>; // qt1070 i2c address
> change-gpio = <&pioA 7 1>; // gpio used as interrupt
> };
> };
>
> Signed-off-by: Bo Shen <[email protected]>
> ---
> drivers/input/keyboard/qt1070.c | 19 ++++++++++++++++---
> 1 file changed, 16 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/input/keyboard/qt1070.c b/drivers/input/keyboard/qt1070.c
> index ca68f29..7d656b5 100644
> --- a/drivers/input/keyboard/qt1070.c
> +++ b/drivers/input/keyboard/qt1070.c
> @@ -33,6 +33,8 @@
> #include <linux/interrupt.h>
> #include <linux/jiffies.h>
> #include <linux/delay.h>
> +#include <linux/of.h>
> +#include <linux/of_gpio.h>
>
> /* Address for each register */
> #define CHIP_ID 0x00
> @@ -155,6 +157,10 @@ static int __devinit qt1070_probe(struct i2c_client
> *client,
> return -ENODEV;
> }
>
> + if (client->dev.of_node)
> + client->irq = of_get_named_gpio(client->dev.of_node,
> + "change-gpio", 0);
> +
> if (!client->irq) {
> dev_err(&client->dev, "please assign the irq to this device\n");
> return -EINVAL;
> @@ -200,9 +206,9 @@ static int __devinit qt1070_probe(struct i2c_client
> *client,
> qt1070_write(client, RESET, 1);
> msleep(QT1070_RESET_TIME);
>
> - err = request_threaded_irq(client->irq, NULL, qt1070_interrupt,
> - IRQF_TRIGGER_NONE | IRQF_ONESHOT,
> - client->dev.driver->name, data);
where is the gpio request done?
Am I missing something?
> + err = request_threaded_irq(gpio_to_irq(client->irq), NULL,
> + qt1070_interrupt, IRQF_TRIGGER_NONE | IRQF_ONESHOT,
> + client->dev.driver->name, data);
> if (err) {
> dev_err(&client->dev, "fail to request irq\n");
> goto err_free_mem;
> @@ -243,6 +249,12 @@ static int __devexit qt1070_remove(struct i2c_client
> *client)
> return 0;
> }
>
> +static const struct of_device_id atmel_qt1070_of_match[] = {
> + { .compatible = "atmel,qt1070", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, atmel_qt1070_of_match);
> +
> static const struct i2c_device_id qt1070_id[] = {
> { "qt1070", 0 },
> { },
> @@ -253,6 +265,7 @@ static struct i2c_driver qt1070_driver = {
> .driver = {
> .name = "qt1070",
> .owner = THIS_MODULE,
> + .of_match_table = atmel_qt1070_of_match,
> },
> .id_table = qt1070_id,
> .probe = qt1070_probe,
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
