Hi Mateo,

Can you give a try with these patches and make sure that it doesn't break 
functionality with STM sensor hub?

Thanks,
Srinivas

-----Original Message-----
From: Alexander Holler [mailto:[email protected]] 
Sent: Sunday, December 09, 2012 3:45 AM
To: [email protected]
Cc: [email protected]; [email protected]; Jonathan Cameron; 
Jiri Kosina; Pandruvada, Srinivas; Alexander Holler
Subject: [PATCH 1/2] HID: autodetect USB HID sensor hubs.

It should not be necessary to add IDs for HID sensor hubs to lists in 
hid-core.c and hid-sensor-hub.c. So instead of a whitelist, autodetect such USB 
HID sensor hubs, based on a collection of type physical inside a useage page of 
type sensor. If some sensor hubs stil must be usable as raw devices, a 
blacklist might be created.

Signed-off-by: Alexander Holler <[email protected]>
---
 drivers/hid/hid-core.c         |   11 ++++++++++-
 drivers/hid/hid-sensor-hub.c   |   32 +-------------------------------
 include/linux/hid-sensor-ids.h |    1 -
 include/linux/hid.h            |    2 ++
 4 files changed, 13 insertions(+), 33 deletions(-)

diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 
f4109fd..7df5399 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -713,7 +713,12 @@ static int hid_scan_report(struct hid_device *hid)
                                        hid_scan_usage(hid, u);
                                break;
                        }
-               }
+               } else if (page == HID_UP_SENSOR &&
+                       item.type == HID_ITEM_TYPE_MAIN &&
+                       item.tag == HID_MAIN_ITEM_TAG_BEGIN_COLLECTION &&
+                       (item_udata(&item) & 0xff) == HID_COLLECTION_PHYSICAL &&
+                       hid->bus == BUS_USB)
+                       hid->group = HID_GROUP_SENSOR_HUB;
        }
 
        return 0;
@@ -1465,6 +1470,10 @@ EXPORT_SYMBOL_GPL(hid_disconnect);
  * there is a proper autodetection and autoloading in place (based on presence
  * of HID_DG_CONTACTID), so those devices don't need to be added to this list,
  * as we are doing the right thing in hid_scan_usage().
+ *
+ * Autodetection for (USB) HID sensor hubs exists too. If a collection 
+ of type
+ * physical is found inside a usage page of type sensor, hid-sensor-hub 
+ will be
+ * used as a driver. See hid_scan_report().
  */
 static const struct hid_device_id hid_have_special_driver[] = {
        { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) }, 
diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c index 
d9d73e9..ca88ddc 100644
--- a/drivers/hid/hid-sensor-hub.c
+++ b/drivers/hid/hid-sensor-hub.c
@@ -82,23 +82,6 @@ struct hid_sensor_hub_callbacks_list {
        void *priv;
 };
 
-static int sensor_hub_check_for_sensor_page(struct hid_device *hdev) -{
-       int i;
-       int ret = -EINVAL;
-
-       for (i = 0; i < hdev->maxcollection; i++) {
-               struct hid_collection *col = &hdev->collection[i];
-               if (col->type == HID_COLLECTION_PHYSICAL &&
-                  (col->usage & HID_USAGE_PAGE) == HID_UP_SENSOR) {
-                       ret = 0;
-                       break;
-               }
-       }
-
-       return ret;
-}
-
 static struct hid_report *sensor_hub_report(int id, struct hid_device *hdev,
                                                int dir)
 {
@@ -524,10 +507,6 @@ static int sensor_hub_probe(struct hid_device *hdev,
                hid_err(hdev, "parse failed\n");
                goto err_free;
        }
-       if (sensor_hub_check_for_sensor_page(hdev) < 0) {
-               hid_err(hdev, "sensor page not found\n");
-               goto err_free;
-       }
        INIT_LIST_HEAD(&hdev->inputs);
 
        ret = hid_hw_start(hdev, 0);
@@ -630,16 +609,7 @@ static void sensor_hub_remove(struct hid_device *hdev)  }
 
 static const struct hid_device_id sensor_hub_devices[] = {
-       { HID_USB_DEVICE(USB_VENDOR_ID_INTEL_8086,
-                       USB_DEVICE_ID_SENSOR_HUB_1020) },
-       { HID_USB_DEVICE(USB_VENDOR_ID_INTEL_8087,
-                       USB_DEVICE_ID_SENSOR_HUB_1020) },
-       { HID_USB_DEVICE(USB_VENDOR_ID_INTEL_8086,
-                       USB_DEVICE_ID_SENSOR_HUB_09FA) },
-       { HID_USB_DEVICE(USB_VENDOR_ID_INTEL_8087,
-                       USB_DEVICE_ID_SENSOR_HUB_09FA) },
-       { HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_STM,
-                       USB_DEVICE_ID_SENSOR_HUB_7014) },
+       { HID_DEVICE(BUS_USB, HID_GROUP_SENSOR_HUB, HID_ANY_ID, HID_ANY_ID) },
        { }
 };
 MODULE_DEVICE_TABLE(hid, sensor_hub_devices); diff --git 
a/include/linux/hid-sensor-ids.h b/include/linux/hid-sensor-ids.h index 
ca8d7e9..55f2773 100644
--- a/include/linux/hid-sensor-ids.h
+++ b/include/linux/hid-sensor-ids.h
@@ -19,7 +19,6 @@
 #ifndef _HID_SENSORS_IDS_H
 #define _HID_SENSORS_IDS_H
 
-#define HID_UP_SENSOR                                          0x00200000
 #define HID_MAX_PHY_DEVICES                                    0xFF
 
 /* Accel 3D (200073) */
diff --git a/include/linux/hid.h b/include/linux/hid.h index c076041..c5f6ec2 
100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -167,6 +167,7 @@ struct hid_item {
 #define HID_UP_MSVENDOR                0xff000000
 #define HID_UP_CUSTOM          0x00ff0000
 #define HID_UP_LOGIVENDOR      0xffbc0000
+#define HID_UP_SENSOR          0x00200000
 
 #define HID_USAGE              0x0000ffff
 
@@ -292,6 +293,7 @@ struct hid_item {
  */
 #define HID_GROUP_GENERIC                      0x0001
 #define HID_GROUP_MULTITOUCH                   0x0002
+#define HID_GROUP_SENSOR_HUB                   0x0003
 
 /*
  * This is the global environment of the parser. This information is
--
1.7.8.6

--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to