On 01/23/2014 04:00 PM, Courtney Cavin wrote:
Cc: Christopher Heiny <[email protected]>
Cc: Dmitry Torokhov <[email protected]>
Signed-off-by: Courtney Cavin <[email protected]>
---
drivers/input/rmi4/rmi_bus.c | 4 ++--
drivers/input/rmi4/rmi_bus.h | 2 +-
drivers/input/rmi4/rmi_driver.c | 17 ++++++++++++-----
drivers/input/rmi4/rmi_f11.c | 4 +++-
4 files changed, 18 insertions(+), 9 deletions(-)
diff --git a/drivers/input/rmi4/rmi_bus.c b/drivers/input/rmi4/rmi_bus.c
index 96a76e7..8a939f3 100644
--- a/drivers/input/rmi4/rmi_bus.c
+++ b/drivers/input/rmi4/rmi_bus.c
@@ -37,7 +37,7 @@ static void rmi_release_device(struct device *dev)
kfree(rmi_dev);
}
-struct device_type rmi_device_type = {
+static struct device_type rmi_device_type = {
.name = "rmi_sensor",
.release = rmi_release_device,
};
This struct is used by diagnostic modules to identify sensor devices, so
it cannot be static.
@@ -145,7 +145,7 @@ static void rmi_release_function(struct device *dev)
kfree(fn);
}
-struct device_type rmi_function_type = {
+static struct device_type rmi_function_type = {
.name = "rmi_function",
.release = rmi_release_function,
};
This struct is used by diagnostic modules to identify function devices,
so it cannot be static.
diff --git a/drivers/input/rmi4/rmi_bus.h b/drivers/input/rmi4/rmi_bus.h
index decb479..2bad2ed 100644
--- a/drivers/input/rmi4/rmi_bus.h
+++ b/drivers/input/rmi4/rmi_bus.h
@@ -103,7 +103,7 @@ int __must_check __rmi_register_function_handler(struct
rmi_function_handler *,
#define rmi_register_function_handler(handler) \
__rmi_register_function_handler(handler, THIS_MODULE, KBUILD_MODNAME)
-void rmi_unregister_function_handler(struct rmi_function_handler *);
+void rmi_unregister_function_handler(struct rmi_function_handler *handler);
/**
* struct rmi_driver - driver for an RMI4 sensor on the RMI bus.
diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c
index 3483e5b..5c6379c 100644
--- a/drivers/input/rmi4/rmi_driver.c
+++ b/drivers/input/rmi4/rmi_driver.c
@@ -32,6 +32,8 @@
#include "rmi_bus.h"
#include "rmi_driver.h"
+#define RMI4_MAX_N_IRQS 256
I see what you're trying to do here, but the IRQ counting patch
submitted previously does this in a more efficient way, though at a
slight cost in compute time during initialization.
+
#define HAS_NONSTANDARD_PDT_MASK 0x40
#define RMI4_MAX_PAGE 0xff
#define RMI4_PAGE_SIZE 0x100
@@ -260,7 +262,7 @@ static void process_one_interrupt(struct rmi_function *fn,
unsigned long *irq_status, struct rmi_driver_data *data)
{
struct rmi_function_handler *fh;
- DECLARE_BITMAP(irq_bits, data->num_of_irq_regs);
+ DECLARE_BITMAP(irq_bits, RMI4_MAX_N_IRQS);
if (!fn || !fn->dev.driver)
return;
@@ -325,7 +327,7 @@ static int process_interrupt_requests(struct rmi_device
*rmi_dev)
static int rmi_driver_set_input_params(struct rmi_device *rmi_dev,
struct input_dev *input)
{
- // FIXME: set up parent
+ /* FIXME: set up parent */
input->name = SYNAPTICS_INPUT_DEVICE_NAME;
input->id.vendor = SYNAPTICS_VENDOR_ID;
input->id.bustype = BUS_RMI;
@@ -466,7 +468,7 @@ static int rmi_driver_reset_handler(struct rmi_device
*rmi_dev)
/*
* Construct a function's IRQ mask. This should be called once and stored.
*/
-int rmi_driver_irq_get_mask(struct rmi_device *rmi_dev,
+static int rmi_driver_irq_get_mask(struct rmi_device *rmi_dev,
struct rmi_function *fn) {
int i;
struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
@@ -665,7 +667,7 @@ static int rmi_scan_pdt(struct rmi_device *rmi_dev)
pdt_entry.function_number, page);
done = false;
- // XXX need to make sure we create F01 first...
+ /* XXX need to make sure we create F01 first... */
retval = create_function(rmi_dev,
&pdt_entry, &irq_count, page_start);
@@ -674,6 +676,11 @@ static int rmi_scan_pdt(struct rmi_device *rmi_dev)
}
done = done || data->f01_bootloader_mode;
}
+ if (irq_count > RMI4_MAX_N_IRQS) {
+ dev_err(dev, "Too many IRQs specified\n");
+ retval = -EINVAL;
+ goto error_exit;
+ }
data->irq_count = irq_count;
data->num_of_irq_regs = (irq_count + 7) / 8;
dev_dbg(dev, "%s: Done with PDT scan.\n", __func__);
@@ -953,7 +960,7 @@ static int rmi_driver_probe(struct device *dev)
return retval;
}
-struct rmi_driver rmi_physical_driver = {
+static struct rmi_driver rmi_physical_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "rmi_physical",
diff --git a/drivers/input/rmi4/rmi_f11.c b/drivers/input/rmi4/rmi_f11.c
index c2be9de..4e0a296 100644
--- a/drivers/input/rmi4/rmi_f11.c
+++ b/drivers/input/rmi4/rmi_f11.c
@@ -610,6 +610,8 @@ static void rmi_f11_abs_pos_report(struct f11_data *f11,
int temp;
u8 abs_base = n_finger * RMI_F11_ABS_BYTES;
+ orient = z = w_min = w_max = 0;
+
if (finger_state) {
x = (data->abs_pos[abs_base] << 4) |
(data->abs_pos[abs_base + 2] & 0x0F);
@@ -1413,7 +1415,7 @@ static int rmi_f11_config(struct rmi_function *fn)
return 0;
}
-int rmi_f11_attention(struct rmi_function *fn,
+static int rmi_f11_attention(struct rmi_function *fn,
unsigned long *irq_bits)
{
struct rmi_device *rmi_dev = fn->rmi_dev;
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
