Remove hid_output_raw_report() call as it is not a ll_driver callbacj, and switch to the hid_hw_* implementation. USB-HID used to fallback into SET_REPORT when there were no output interrupt endpoint, so emulating this if hid_hw_output_report() returns -ENOSYS.
Signed-off-by: Benjamin Tissoires <[email protected]> --- drivers/hid/hidraw.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index f8708c9..704718b 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -123,10 +123,8 @@ static ssize_t hidraw_send_report(struct file *file, const char __user *buffer, dev = hidraw_table[minor]->hid; - if (!dev->hid_output_raw_report) { - ret = -ENODEV; - goto out; - } + if (!dev->ll_driver->raw_request || !dev->ll_driver->output_report) + return -ENODEV; if (count > HID_MAX_BUFFER_SIZE) { hid_warn(dev, "pid %d passed too large report\n", @@ -153,7 +151,21 @@ static ssize_t hidraw_send_report(struct file *file, const char __user *buffer, goto out_free; } - ret = hid_output_raw_report(dev, buf, count, report_type); + if (report_type == HID_OUTPUT_REPORT) { + ret = hid_hw_output_report(dev, buf, count); + /* + * compatibility with old implementation of USB-HID and I2C-HID: + * if the device does not support receiving output reports, + * on an interrupt endpoint, then fallback to the SET_REPORT + * HID command. + */ + if (ret != -ENOSYS) + goto out_free; + } + + ret = hid_hw_raw_request(dev, buf[0], buf, count, report_type, + HID_REQ_SET_REPORT); + out_free: kfree(buf); out: -- 1.8.3.1 -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
