Hi,
I found this touchscreen chip built into the board of the Posiflex
XT3015 cash register hardware.
Sadly, it doesn't work with the current usbhid OOTB. As the device ID
isn't in the hid-ids.h, I tried adding it:
--------------------------------------------------------------------------
diff -urN linux-3.10.27.orig/drivers/hid/hid-ids.h
linux-3.10.27/drivers/hid/hid-ids.h
--- linux-3.10.27.orig/drivers/hid/hid-ids.h 2014-01-16
00:29:14.000000000 +0100
+++ linux-3.10.27/drivers/hid/hid-ids.h 2014-03-04 20:51:09.889687222 +0100
@@ -268,6 +268,7 @@
#define USB_DEVICE_ID_DWAV_TOUCHCONTROLLER 0x0002
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_480D 0x480d
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_480E 0x480e
+#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7200 0x7200
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7207 0x7207
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_720C 0x720c
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7224 0x7224
diff -urN linux-3.10.27.orig/drivers/hid/hid-multitouch.c
linux-3.10.27/drivers/hid/hid-multitouch.c
--- linux-3.10.27.orig/drivers/hid/hid-multitouch.c 2014-01-16
00:29:14.000000000 +0100
+++ linux-3.10.27/drivers/hid/hid-multitouch.c 2014-03-04
20:48:35.351350357 +0100
@@ -1166,6 +1166,9 @@
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_A001) },
{ .driver_data = MT_CLS_EGALAX,
HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+ USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7200) },
+ { .driver_data = MT_CLS_EGALAX,
+ HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7224) },
{ .driver_data = MT_CLS_EGALAX,
HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
--------------------------------------------------------------------------
That works. Haven't checked the multitouch functions, though.
Kind regards
Jan
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
