Hi Chris,
On Tue, Mar 04, 2014 at 02:52:30PM -0800, Christopher Heiny wrote:
> RMI4 Function 0x30 provides support for GPIOs, LEDs and mechanical
> buttons. In particular, the mechanical button support is used in
> an increasing number of touchpads.
>
> Note - this is basically the same as last week's patch, just updated to
> work with the changes committed to synaptics-rmi4 branch over the weekend.
>
> Signed-off-by: Andrew Duggan <[email protected]>
> Signed-off-by: Allie Xiong <[email protected]>
> Acked-by: Christopher Heiny <[email protected]>
> Cc: Dmitry Torokhov <[email protected]>
> Cc: Benjamin Tissoires <[email protected]>
> Cc: Linux Walleij <[email protected]>
> Cc: David Herrmann <[email protected]>
> Cc: Jiri Kosina <[email protected]>
>
> ---
>
> drivers/input/rmi4/Kconfig | 12 +
> drivers/input/rmi4/Makefile | 1 +
> drivers/input/rmi4/rmi_f30.c | 618
> +++++++++++++++++++++++++++++++++++++++++++
> include/linux/rmi.h | 7 +-
> 4 files changed, 637 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/input/rmi4/Kconfig b/drivers/input/rmi4/Kconfig
> index d0c7b6e..14d5f49 100644
> --- a/drivers/input/rmi4/Kconfig
> +++ b/drivers/input/rmi4/Kconfig
> @@ -63,3 +63,15 @@ config RMI4_F11_PEN
> If your system is not recognizing pen touches and you know your
> sensor supports pen input, you probably want to turn this feature
> off.
> +
> +config RMI4_F30
> + tristate "RMI4 Function 30 (GPIO LED)"
> + depends on RMI4_CORE
> + help
> + Say Y here if you want to add support for RMI4 function 30.
> +
> + Function 30 provides GPIO and LED support for RMI4 devices. This
> + includes support for buttons on TouchPads and ClickPads.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called rmi-f30.
> diff --git a/drivers/input/rmi4/Makefile b/drivers/input/rmi4/Makefile
> index 5c6bad5..ecffd72 100644
> --- a/drivers/input/rmi4/Makefile
> +++ b/drivers/input/rmi4/Makefile
> @@ -3,6 +3,7 @@ rmi_core-y := rmi_bus.o rmi_driver.o rmi_f01.o
>
> # Function drivers
> obj-$(CONFIG_RMI4_F11) += rmi_f11.o
> +obj-$(CONFIG_RMI4_F30) += rmi_f30.o
>
> # Transports
> obj-$(CONFIG_RMI4_I2C) += rmi_i2c.o
> diff --git a/drivers/input/rmi4/rmi_f30.c b/drivers/input/rmi4/rmi_f30.c
> new file mode 100644
> index 0000000..558b3a3
> --- /dev/null
> +++ b/drivers/input/rmi4/rmi_f30.c
> @@ -0,0 +1,618 @@
> +/*
> + * Copyright (c) 2012 - 2014 Synaptics Incorporated
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published
> by
> + * the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/rmi.h>
> +#include <linux/input.h>
> +#include <linux/slab.h>
> +#include <linux/gpio.h>
> +#include <linux/leds.h>
> +#include "rmi_driver.h"
> +
> +#define RMI_F30_QUERY_SIZE 2
> +
> + /* Defs for Query 0 */
> +#define RMI_F30_EXTENDED_PATTERNS 0x01
> +#define RMI_F30_HAS_MAPPABLE_BUTTONS (1 << 1)
> +#define RMI_F30_HAS_LED (1 << 2)
> +#define RMI_F30_HAS_GPIO (1 << 3)
> +#define RMI_F30_HAS_HAPTIC (1 << 4)
> +#define RMI_F30_HAS_GPIO_DRV_CTL (1 << 5)
> +#define RMI_F30_HAS_MECH_MOUSE_BTNS (1 << 6)
> +
> +/* Defs for Query 1 */
> +#define RMI_F30_GPIO_LED_COUNT 0x1F
> +
> +/* Defs for Control Registers */
> +#define RMI_F30_CTRL_1_GPIO_DEBOUNCE 0x01
> +#define RMI_F30_CTRL_1_HALT (1 << 4)
> +#define RMI_F30_CTRL_1_HALTED (1 << 5)
> +#define RMI_F30_CTRL_10_NUM_MECH_MOUSE_BTNS 0x03
> +
> +#define RMI_F30_CTRL_DATA(ctrl_num, max_size) \
> +struct rmi_f30_ctrl##ctrl_num##_data { \
> + int address; \
> + int length; \
> + u8 regs[max_size]; \
> +}
> +
> +#define RMI_F30_CTRL_MAX_REGS 32
> +#define RMI_F30_CTRL_MAX_BYTES ((RMI_F30_CTRL_MAX_REGS + 7) >> 3)
> +
> +struct f30_data {
> + /* Query Data */
> + bool has_extended_pattern;
> + bool has_mappable_buttons;
> + bool has_led;
> + bool has_gpio;
> + bool has_haptic;
> + bool has_gpio_driver_control;
> + bool has_mech_mouse_btns;
> + u8 gpioled_count;
> +
> + u8 register_count;
> +
> + /* Control Register Data */
> + RMI_F30_CTRL_DATA(0, RMI_F30_CTRL_MAX_BYTES) ctrl_0;
> + RMI_F30_CTRL_DATA(1, 1) ctrl_1;
> + RMI_F30_CTRL_DATA(2, RMI_F30_CTRL_MAX_BYTES) ctrl_2;
> + RMI_F30_CTRL_DATA(3, RMI_F30_CTRL_MAX_BYTES) ctrl_3;
> + RMI_F30_CTRL_DATA(4, RMI_F30_CTRL_MAX_BYTES) ctrl_4;
> + RMI_F30_CTRL_DATA(5, 6) ctrl_5;
> + RMI_F30_CTRL_DATA(6, RMI_F30_CTRL_MAX_REGS) ctrl_6;
> + RMI_F30_CTRL_DATA(7, RMI_F30_CTRL_MAX_REGS) ctrl_7;
> + RMI_F30_CTRL_DATA(8, RMI_F30_CTRL_MAX_BYTES) ctrl_8;
> + RMI_F30_CTRL_DATA(9, 1) ctrl_9;
> + RMI_F30_CTRL_DATA(10, 1) ctrl_10;
This should probably be an array so you could use loops to populate it.
> +
> + u8 data_regs[RMI_F30_CTRL_MAX_BYTES];
> + struct rmi_f30_button *gpioled_map;
> +
> + char input_phys[NAME_BUFFER_SIZE];
> + struct input_dev *input;
> +};
> +
> +static int rmi_f30_read_control_parameters(struct rmi_device *rmi_dev,
> + struct f30_data *f30)
> +{
> + int retval = 0;
> +
> + if (f30->ctrl_0.length) {
> + retval = rmi_read_block(rmi_dev, f30->ctrl_0.address,
> + f30->ctrl_0.regs, f30->ctrl_0.length);
> + if (retval < 0) {
rmi_read/write are no longer return partial writes so lets do:
error = rmi_XXX();
if (error)
dev_err(...)
return error;
Might also want to report error code in error messages.
> + dev_err(&rmi_dev->dev,
> + "%s : Could not read control reg0 to 0x%x\n",
> + __func__, f30->ctrl_0.address);
> + return retval;
> + }
> + }
> +
> + if (f30->ctrl_1.length) {
> + retval = rmi_read_block(rmi_dev, f30->ctrl_1.address,
> + f30->ctrl_1.regs, f30->ctrl_1.length);
> + if (retval < 0) {
> + dev_err(&rmi_dev->dev,
> + "%s : Could not read control reg1 to 0x%x\n",
> + __func__, f30->ctrl_1.address);
> + return retval;
> + }
> + }
> +
> + if (f30->ctrl_2.length) {
> + retval = rmi_read_block(rmi_dev, f30->ctrl_2.address,
> + f30->ctrl_2.regs, f30->ctrl_2.length);
> + if (retval < 0) {
> + dev_err(&rmi_dev->dev,
> + "%s : Could not read control reg2 to 0x%x\n",
> + __func__, f30->ctrl_2.address);
> + return retval;
> + }
> + }
> +
> + if (f30->ctrl_3.length) {
> + retval = rmi_read_block(rmi_dev, f30->ctrl_3.address,
> + f30->ctrl_3.regs, f30->ctrl_3.length);
> + if (retval < 0) {
> + dev_err(&rmi_dev->dev,
> + "%s : Could not read control reg3 to 0x%x\n",
> + __func__, f30->ctrl_3.address);
> + return retval;
> + }
> + }
> +
> + if (f30->ctrl_4.length) {
> + retval = rmi_read_block(rmi_dev, f30->ctrl_4.address,
> + f30->ctrl_4.regs, f30->ctrl_4.length);
> + if (retval < 0) {
> + dev_err(&rmi_dev->dev,
> + "%s : Could not read control reg4 to 0x%x\n",
> + __func__, f30->ctrl_4.address);
> + return retval;
> + }
> + }
> +
> + if (f30->ctrl_5.length) {
> + retval = rmi_read_block(rmi_dev, f30->ctrl_5.address,
> + f30->ctrl_5.regs, f30->ctrl_5.length);
> + if (retval < 0) {
> + dev_err(&rmi_dev->dev,
> + "%s : Could not read control reg5 to 0x%x\n",
> + __func__, f30->ctrl_5.address);
> + return retval;
> + }
> + }
> +
> + if (f30->ctrl_6.length) {
> + retval = rmi_read_block(rmi_dev, f30->ctrl_6.address,
> + f30->ctrl_6.regs, f30->ctrl_6.length);
> + if (retval < 0) {
> + dev_err(&rmi_dev->dev,
> + "%s : Could not read control reg6 to 0x%x\n",
> + __func__, f30->ctrl_6.address);
> + return retval;
> + }
> + }
> +
> + if (f30->ctrl_7.length) {
> + retval = rmi_read_block(rmi_dev, f30->ctrl_7.address,
> + f30->ctrl_1.regs, f30->ctrl_7.length);
> + if (retval < 0) {
> + dev_err(&rmi_dev->dev,
> + "%s : Could not read control reg7 to 0x%x\n",
> + __func__, f30->ctrl_7.address);
> + return retval;
> + }
> + }
> +
> + if (f30->ctrl_8.length) {
> + retval = rmi_read_block(rmi_dev, f30->ctrl_8.address,
> + f30->ctrl_8.regs, f30->ctrl_8.length);
> + if (retval < 0) {
> + dev_err(&rmi_dev->dev,
> + "%s : Could not read control reg8 to 0x%x\n",
> + __func__, f30->ctrl_8.address);
> + return retval;
> + }
> + }
> +
> + if (f30->ctrl_9.length) {
> + retval = rmi_read_block(rmi_dev, f30->ctrl_9.address,
> + f30->ctrl_9.regs, f30->ctrl_9.length);
> + if (retval < 0) {
> + dev_err(&rmi_dev->dev,
> + "%s : Could not read control reg9 to 0x%x\n",
> + __func__, f30->ctrl_9.address);
> + return retval;
> + }
> + }
> +
> + if (f30->ctrl_10.length) {
> + retval = rmi_read_block(rmi_dev, f30->ctrl_10.address,
> + f30->ctrl_10.regs, f30->ctrl_10.length);
> + if (retval < 0) {
> + dev_err(&rmi_dev->dev,
> + "%s : Could not read control reg1 to 0x%x\n",
> + __func__, f30->ctrl_10.address);
> + return retval;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int rmi_f30_attention(struct rmi_function *fn,
> + unsigned long *irq_bits)
> +{
> + struct f30_data *f30 = dev_get_drvdata(&fn->dev);
> + int retval;
> + int gpiled = 0;
> + int value = 0;
> + int i;
> + int reg_num;
> +
> + /* Read the gpi led data. */
> + retval = rmi_read_block(fn->rmi_dev, fn->fd.data_base_addr,
> + f30->data_regs, f30->register_count);
> +
> + if (retval < 0) {
> + dev_err(&fn->dev, "%s: Failed to read F30 data registers.\n",
> + __func__);
> + return retval;
> + }
> +
> + for (reg_num = 0; reg_num < f30->register_count; ++reg_num) {
> + for (i = 0; gpiled < f30->gpioled_count && i < 8; ++i,
> + ++gpiled) {
> + if (f30->gpioled_map[gpiled].button != 0) {
> + value = (((f30->data_regs[reg_num] >> i) & 0x01)
> + == f30->gpioled_map[gpiled].sense);
> +
> + dev_dbg(&fn->dev,
> + "%s: call input report key (0x%04x)
> value (0x%02x)",
> + __func__,
> + f30->gpioled_map[gpiled].button, value);
> + input_report_key(f30->input,
> + f30->gpioled_map[gpiled].button,
> + value);
> + }
> +
> + }
> + }
> +
> + input_sync(f30->input); /* sync after groups of events */
> + return 0;
> +}
> +
> +static int rmi_f30_register_device(struct rmi_function *fn)
> +{
> + int i;
> + int rc;
> + struct rmi_device *rmi_dev = fn->rmi_dev;
> + struct f30_data *f30 = dev_get_drvdata(&fn->dev);
> + struct rmi_driver *driver = fn->rmi_dev->driver;
> + struct input_dev *input_dev = input_allocate_device();
I would prefer you did not hide allocation in variable declarations.
Also since the rest of resources in f30 implementation are devres
managed you can use devm_input_allocate_device(). Otherwise you need to
provide remove) methof for f30 which is currently is missing.
> +
> + if (!input_dev) {
> + dev_err(&fn->dev, "Failed to allocate input device.\n");
> + return -ENOMEM;
> + }
> +
> + f30->input = input_dev;
> +
> + if (driver->set_input_params) {
> + rc = driver->set_input_params(rmi_dev, input_dev);
> + if (rc < 0) {
> + dev_err(&fn->dev, "%s: Error in setting input
> device.\n",
> + __func__);
> + goto error_free_device;
> + }
> + }
> + sprintf(f30->input_phys, "%s/input0", dev_name(&fn->dev));
> + input_dev->phys = f30->input_phys;
> + input_dev->dev.parent = &rmi_dev->dev;
> + input_set_drvdata(input_dev, f30);
> +
> + /* Set up any input events. */
> + set_bit(EV_SYN, input_dev->evbit);
> + set_bit(EV_KEY, input_dev->evbit);
> + input_dev->keycode = f30->gpioled_map;
> + input_dev->keycodesize = 1;
This should be sizeof(unsigned short) - we have passed 255 limit on
keycodes.
> + input_dev->keycodemax = f30->gpioled_count;
By doing the above 2 assigments you indicate to input core that it
shoudl use default implementation of EVIOCGKEYCODE/EVIOCSKEYCODE, but
what you supply in input_dev->keycode is not a flat keymap.
> + /* set bits for each qpio led pin... */
> + for (i = 0; i < f30->gpioled_count; i++) {
> + if (f30->gpioled_map[i].button != 0) {
> + set_bit(f30->gpioled_map[i].button, input_dev->keybit);
> + input_set_capability(input_dev, EV_KEY,
> + f30->gpioled_map[i].button);
input_set_capability() does the set_bit(keycode, input_dev->keybit) for
you.
> + }
> + }
> +
> + rc = input_register_device(input_dev);
> + if (rc < 0) {
> + dev_err(&fn->dev, "Failed to register input device.\n");
> + goto error_free_device;
> + }
> + return 0;
> +
> +error_free_device:
> + input_free_device(input_dev);
> +
> + return rc;
> +}
> +
> +static int rmi_f30_config(struct rmi_function *fn)
> +{
> + struct f30_data *f30 = dev_get_drvdata(&fn->dev);
> + int rc;
> +
> + /* Write Control Register values back to device */
> + if (f30->ctrl_0.length) {
> + rc = rmi_write_block(fn->rmi_dev, f30->ctrl_0.address,
> + f30->ctrl_0.regs,
> + f30->ctrl_0.length);
> + if (rc < 0) {
> + dev_err(&fn->dev, "%s error %d: Could not write control
> 0 to 0x%x\n",
> + __func__, rc, f30->ctrl_0.address);
> + return rc;
> + }
> + }
> +
> + if (f30->ctrl_1.length) {
> + rc = rmi_write_block(fn->rmi_dev, f30->ctrl_1.address,
> + f30->ctrl_1.regs,
> + f30->ctrl_1.length);
> + if (rc < 0) {
> + dev_err(&fn->dev, "%s error %d: Could not write control
> 1 to 0x%x\n",
> + __func__, rc, f30->ctrl_1.address);
> + return rc;
> + }
> + }
> +
> + if (f30->ctrl_2.length) {
> + rc = rmi_write_block(fn->rmi_dev, f30->ctrl_2.address,
> + f30->ctrl_2.regs,
> + f30->ctrl_2.length);
> + if (rc < 0) {
> + dev_err(&fn->dev, "%s error %d: Could not write control
> 2 to 0x%x\n",
> + __func__, rc, f30->ctrl_2.address);
> + return rc;
> + }
> + }
> +
> + if (f30->ctrl_3.length) {
> + rc = rmi_write_block(fn->rmi_dev, f30->ctrl_3.address,
> + f30->ctrl_3.regs,
> + f30->ctrl_3.length);
> + if (rc < 0) {
> + dev_err(&fn->dev, "%s error %d: Could not write control
> 3 to 0x%x\n",
> + __func__, rc, f30->ctrl_3.address);
> + return rc;
> + }
> + }
> +
> + if (f30->ctrl_4.length) {
> + rc = rmi_write_block(fn->rmi_dev, f30->ctrl_4.address,
> + f30->ctrl_4.regs,
> + f30->ctrl_4.length);
> + if (rc < 0) {
> + dev_err(&fn->dev, "%s error %d: Could not write control
> 4 to 0x%x\n",
> + __func__, rc, f30->ctrl_4.address);
> + return rc;
> + }
> + }
> +
> + if (f30->ctrl_5.length) {
> + rc = rmi_write_block(fn->rmi_dev, f30->ctrl_5.address,
> + f30->ctrl_5.regs,
> + f30->ctrl_5.length);
> + if (rc < 0) {
> + dev_err(&fn->dev, "%s error %d: Could not write control
> 5 to 0x%x\n",
> + __func__, rc, f30->ctrl_5.address);
> + return rc;
> + }
> + }
> +
> + if (f30->ctrl_6.length) {
> + rc = rmi_write_block(fn->rmi_dev, f30->ctrl_6.address,
> + f30->ctrl_6.regs,
> + f30->ctrl_6.length);
> + if (rc < 0) {
> + dev_err(&fn->dev, "%s error %d: Could not write control
> 6 to 0x%x\n",
> + __func__, rc, f30->ctrl_6.address);
> + return rc;
> + }
> + }
> +
> + if (f30->ctrl_7.length) {
> + rc = rmi_write_block(fn->rmi_dev, f30->ctrl_7.address,
> + f30->ctrl_7.regs,
> + f30->ctrl_7.length);
> + if (rc < 0) {
> + dev_err(&fn->dev, "%s error %d: Could not write control
> 7 to 0x%x\n",
> + __func__, rc, f30->ctrl_7.address);
> + return rc;
> + }
> + }
> +
> + if (f30->ctrl_8.length) {
> + rc = rmi_write_block(fn->rmi_dev, f30->ctrl_8.address,
> + f30->ctrl_8.regs,
> + f30->ctrl_8.length);
> + if (rc < 0) {
> + dev_err(&fn->dev, "%s error %d: Could not write control
> 8 to 0x%x\n",
> + __func__, rc, f30->ctrl_8.address);
> + return rc;
> + }
> + }
> +
> + if (f30->ctrl_9.length) {
> + rc = rmi_write_block(fn->rmi_dev, f30->ctrl_9.address,
> + f30->ctrl_9.regs,
> + f30->ctrl_9.length);
> + if (rc < 0) {
> + dev_err(&fn->dev, "%s error %d: Could not write control
> 9 to 0x%x\n",
> + __func__, rc, f30->ctrl_9.address);
> + return rc;
> + }
> + }
> +
> + if (f30->ctrl_10.length) {
> + rc = rmi_write_block(fn->rmi_dev, f30->ctrl_10.address,
> + f30->ctrl_10.regs,
> + f30->ctrl_10.length);
> + if (rc < 0) {
> + dev_err(&fn->dev, "%s error %d: Could not write control
> 10 to 0x%x\n",
> + __func__, rc, f30->ctrl_10.address);
> + return rc;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static inline int rmi_f30_initialize(struct rmi_function *fn)
> +{
> + struct f30_data *f30;
> + struct rmi_device *rmi_dev = fn->rmi_dev;
> + const struct rmi_device_platform_data *pdata;
> + int retval = 0;
> + int control_address;
> + u8 buf[RMI_F30_QUERY_SIZE];
> +
> + f30 = devm_kzalloc(&fn->dev, sizeof(struct f30_data),
> + GFP_KERNEL);
> + if (!f30) {
> + dev_err(&fn->dev, "Failed to allocate f30_data.\n");
> + return -ENOMEM;
> + }
> + dev_set_drvdata(&fn->dev, f30);
> +
> + retval = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr, buf,
> + RMI_F30_QUERY_SIZE);
> +
> + if (retval < 0) {
> + dev_err(&fn->dev, "Failed to read query register.\n");
> + return retval;
> + }
> +
> + f30->has_extended_pattern = buf[0] & RMI_F30_EXTENDED_PATTERNS;
> + f30->has_mappable_buttons = buf[0] & RMI_F30_HAS_MAPPABLE_BUTTONS;
> + f30->has_led = buf[0] & RMI_F30_HAS_LED;
> + f30->has_gpio = buf[0] & RMI_F30_HAS_GPIO;
> + f30->has_haptic = buf[0] & RMI_F30_HAS_HAPTIC;
> + f30->has_gpio_driver_control = buf[0] & RMI_F30_HAS_GPIO_DRV_CTL;
> + f30->has_mech_mouse_btns = buf[0] & RMI_F30_HAS_MECH_MOUSE_BTNS;
> + f30->gpioled_count = buf[1] & RMI_F30_GPIO_LED_COUNT;
> +
> + f30->register_count = (f30->gpioled_count + 7) >> 3;
> +
> + control_address = fn->fd.control_base_addr;
> +
> + /* Allocate buffers for the control registers */
> + if (f30->has_led && f30->has_led) {
> + f30->ctrl_0.address = control_address;
> + f30->ctrl_0.length = f30->register_count;
> + control_address += f30->ctrl_0.length;
> + }
> +
> + f30->ctrl_1.address = control_address;
> + f30->ctrl_1.length = sizeof(u8);
> + control_address += f30->ctrl_1.length;
> +
> + if (f30->has_gpio) {
> + f30->ctrl_2.address = control_address;
> + f30->ctrl_2.length = f30->register_count;
> + control_address += f30->ctrl_2.length;
> +
> + f30->ctrl_3.address = control_address;
> + f30->ctrl_3.length = f30->register_count;
> + control_address += f30->ctrl_3.length;
> + }
> +
> + if (f30->has_led) {
> + f30->ctrl_4.address = control_address;
> + f30->ctrl_4.length = f30->register_count;
> + control_address += f30->ctrl_4.length;
> +
> + if (f30->has_extended_pattern)
> + f30->ctrl_5.length = 6;
> + else
> + f30->ctrl_5.length = 2;
> +
> + f30->ctrl_5.address = control_address;
> + control_address += f30->ctrl_5.length;
> + }
> +
> + if (f30->has_led || f30->has_gpio_driver_control) {
> + /* control 6 uses a byte per gpio/led */
> + f30->ctrl_6.address = control_address;
> + f30->ctrl_6.length = f30->gpioled_count;
> + control_address += f30->ctrl_6.length;
> +
> + }
> +
> + if (f30->has_mappable_buttons) {
> + /* control 7 uses a byte per gpio/led */
> + f30->ctrl_7.address = control_address;
> + f30->ctrl_7.length = f30->gpioled_count;
> + control_address += f30->ctrl_7.length;
> + }
> +
> + if (f30->has_haptic) {
> + f30->ctrl_8.address = control_address;
> + f30->ctrl_8.length = f30->register_count;
> + control_address += f30->ctrl_8.length;
> +
> + f30->ctrl_9.address = control_address;
> + f30->ctrl_9.length = sizeof(u8);
> + control_address += f30->ctrl_9.length;
> + }
> +
> + if (f30->has_mech_mouse_btns) {
> + f30->ctrl_10.address = control_address;
> + f30->ctrl_10.length = sizeof(u8);
> + control_address += f30->ctrl_10.length;
> + }
> +
> + f30->gpioled_map = devm_kzalloc(&fn->dev,
> + f30->gpioled_count
> + * sizeof(struct rmi_f30_button),
> + GFP_KERNEL);
> + if (!f30->gpioled_map) {
> + dev_err(&fn->dev, "Failed to allocate button map.\n");
> + return -ENOMEM;
> + }
> +
> + pdata = rmi_get_platform_data(rmi_dev);
> + if (pdata) {
> + if (!pdata->gpioled_map) {
> + dev_warn(&fn->dev,
> + "%s - gpioled_map is NULL", __func__);
> + } else if (pdata->gpioled_map->ngpioleds < f30->gpioled_count) {
Should you only map the entries that have 'valid' bit and export the
rest as generic gpio? And leds as leds?
> + dev_warn(&fn->dev,
> + "Platform Data gpioled map size (%d) is less
> then the number of buttons on device (%d) - ignored\n",
> + pdata->gpioled_map->ngpioleds,
> + f30->gpioled_count);
> + } else if (!pdata->gpioled_map->map) {
> + dev_warn(&fn->dev,
> + "Platform Data button map is missing!\n");
> + } else {
> + int i;
> + for (i = 0; i < f30->gpioled_count; i++)
> + memcpy(&f30->gpioled_map[i],
> + &pdata->gpioled_map->map[i],
> + sizeof(struct rmi_f30_button));
> + }
> + }
> +
> + retval = rmi_f30_read_control_parameters(rmi_dev, f30);
> + if (retval < 0) {
> + dev_err(&fn->dev,
> + "Failed to initialize F19 control params.\n");
> + return retval;
> + }
> +
> + return 0;
> +}
> +
> +static int rmi_f30_probe(struct rmi_function *fn)
> +{
> + int rc;
> +
> + rc = rmi_f30_initialize(fn);
> + if (rc < 0)
> + goto error_exit;
> +
> + rc = rmi_f30_register_device(fn);
> + if (rc < 0)
> + goto error_exit;
> +
> + return 0;
> +
> +error_exit:
> + return rc;
> +
> +}
> +
> +static struct rmi_function_handler rmi_f30_handler = {
> + .driver = {
> + .name = "rmi_f30",
> + },
> + .func = 0x30,
> + .probe = rmi_f30_probe,
> + .config = rmi_f30_config,
> + .attention = rmi_f30_attention,
> +};
> +
> +module_rmi_driver(rmi_f30_handler);
> +
> +MODULE_AUTHOR("Allie Xiong <[email protected]>");
> +MODULE_AUTHOR("Andrew Duggan <[email protected]>");
> +MODULE_DESCRIPTION("RMI F30 module");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/rmi.h b/include/linux/rmi.h
> index 735e978..889a627 100644
> --- a/include/linux/rmi.h
> +++ b/include/linux/rmi.h
> @@ -139,9 +139,14 @@ struct rmi_button_map {
> u8 *map;
> };
>
> +struct rmi_f30_button {
> + u16 button;
> + int sense;
> +};
> +
> struct rmi_f30_gpioled_map {
> u8 ngpioleds;
> - u8 *map;
> + struct rmi_f30_button *map;
> };
>
> /**
Thanks.
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
