> This patch introduces the preliminary support for PMICs X-Powers AXP202
> and AXP209. The AXP209 and AXP202 are the PMUs (Power Management Unit)
> used by A10, A13 and A20 SoCs and developed by X-Powers, a sister company
> of Allwinner.
>
> The core enables support for two subsystems:
> - PEK (Power Enable Key)
> - Regulators
>
> Signed-off-by: Carlo Caione <[email protected]>
> ---
> drivers/mfd/Kconfig | 12 +++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/axp20x.c | 240
> +++++++++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/axp20x.h | 180 ++++++++++++++++++++++++++++++++++
> 4 files changed, 433 insertions(+)
> create mode 100644 drivers/mfd/axp20x.c
> create mode 100644 include/linux/mfd/axp20x.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 49bb445..24ba61a 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -59,6 +59,18 @@ config MFD_AAT2870_CORE
> additional drivers must be enabled in order to use the
> functionality of the device.
>
> +config MFD_AXP20X
> + bool "X-Powers AXP20X"
> + select MFD_CORE
> + select REGMAP_I2C
> + select REGMAP_IRQ
> + depends on I2C=y
> + help
> + If you say Y here you get support for the AXP20X.
> + This driver provides common support for accessing the device,
> + additional drivers must be enabled in order to use the
> + functionality of the device.
Please tell us what this device is and what sub-devices are available?
[...]
> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
> new file mode 100644
> index 0000000..f77a663
> --- /dev/null
> +++ b/drivers/mfd/axp20x.c
> @@ -0,0 +1,240 @@
> +/*
> + * axp20x.c - MFD core driver for the X-Powers AXP202 and AXP209
... which consist of ...
[...]
> +static struct resource axp20x_pek_resources[] = {
> + {
> + .name = "PEK_DBR",
> + .start = AXP20X_IRQ_PEK_RIS_EDGE,
> + .end = AXP20X_IRQ_PEK_RIS_EDGE,
> + .flags = IORESOURCE_IRQ,
> + }, {
> + .name = "PEK_DBF",
> + .start = AXP20X_IRQ_PEK_FAL_EDGE,
> + .end = AXP20X_IRQ_PEK_FAL_EDGE,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
Have you considered doing this in the Device Tree? It's a lot less
code/overhead.
> +static const struct i2c_device_id axp20x_i2c_id[] = {
> + { },
> +};
> +MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id);
We really should consider changing the I2C subsystem!
Can you add a comment here describing why we have to add this
seemingly pointless empty struct please?
> +static struct mfd_cell axp20x_cells[] = {
> + {
> + .name = "axp20x-pek",
> + .num_resources = ARRAY_SIZE(axp20x_pek_resources),
> + .resources = axp20x_pek_resources,
> + }, {
> + .name = "axp20x-regulator",
> + },
> +};
Do these drivers don't look inside the DTB at all?
[...]
> + of_id = of_match_device(axp20x_of_match, &i2c->dev);
> + if (!of_id) {
> + dev_err(&i2c->dev, "Unable to setup AXP20X data\n");
> + return -ENODEV;
> + }
> + axp20x->variant = (int) of_id->data;
'variant' needs to be a (unsigned?) long or it will break on 64bit
architectures.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
