> On 19/05/2014 21:47, Carlo Caione wrote: > > Bindings documentation for the AXP20x driver. In this file also > > sub-nodes are documented. > > I think this patch has been forgotten (I didn't find it in linus' tree > or linux-next tree).
This patch-set became confusing. Some of the patches were applied in v5 and were still submitted for v6. I need Carlo to rebase on top of v3.16-rc1+ and re-submit with the Acks he's collected so far. > > Signed-off-by: Carlo Caione <[email protected]> > > Acked-by: Maxime Ripard <[email protected]> > > --- > > Documentation/devicetree/bindings/mfd/axp20x.txt | 93 > > ++++++++++++++++++++++++ > > 1 file changed, 93 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/mfd/axp20x.txt > > > > diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt > > b/Documentation/devicetree/bindings/mfd/axp20x.txt > > new file mode 100644 > > index 0000000..cc9e01b > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt > > @@ -0,0 +1,93 @@ > > +AXP202/AXP209 device tree bindings > > + > > +The axp20x family current members :- > > +axp202 (X-Powers) > > +axp209 (X-Powers) > > + > > +Required properties: > > +- compatible: "x-powers,axp202" or "x-powers,axp209" > > +- reg: The I2C slave address for the AXP chip > > +- interrupt-parent: The parent interrupt controller > > +- interrupts: Interrupt specifiers for interrupt sources > > +- interrupt-controller: axp20x has its own internal IRQs > > +- #interrupt-cells: Should be set to 1 > > +- acin-supply: The input supply for LDO1 > > +- vin2-supply: The input supply for DCDC2 > > +- vin3-supply: The input supply for DCDC3 > > +- ldo24in-supply: The input supply for LDO2, LDO4 > > +- ldo3in-supply: The input supply for LDO3 > > +- ldo5in-supply: The input supply for LDO5 > > + > > +- regulators: A node that houses a sub-node for each regulator. The > > regulators are > > + bound using their name as listed here: dcdc2, dcdc3, ldo1, ldo2, > > + ldo3, ldo4, ldo5. The bindings details of individual regulator > > + device can be found in: > > + Documentation/devicetree/bindings/regulator/regulator.txt with > > + the exception of x-powers,dcdc-freq > > +- x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz > > + (range: 750-1875). Default: 1.5MHz > > + > > +Optional properties for DCDCs: > > +- x-powers,dcdc-workmode: 1 for PWM mode, 0 for AUTO mode > > + Default: AUTO mode > > + > > +Example: > > + > > +axp209: pmic@34 { > > + compatible = "x-powers,axp209"; > > + reg = <0x34>; > > + interrupt-parent = <&nmi_intc>; > > + interrupts = <0 8>; > > + > > + interrupt-controller; > > + #interrupt-cells = <1>; > > + > > + acin-supply = <&axp_ipsout_reg>; > > + vin2-supply = <&axp_ipsout_reg>; > > + vin3-supply = <&axp_ipsout_reg>; > > + ldo24in-supply = <&axp_ipsout_reg>; > > + ldo3in-supply = <&axp_ipsout_reg>; > > + ldo5in-supply = <&axp_ipsout_reg>; > > + > > + regulators { > > + x-powers,dcdc-freq = <1500>; > > + > > + axp_vcore_reg: dcdc2 { > > + regulator-min-microvolt = <700000>; > > + regulator-max-microvolt = <2275000>; > > + regulator-always-on; > > + }; > > + > > + axp_ddr_reg: dcdc3 { > > + regulator-min-microvolt = <700000>; > > + regulator-max-microvolt = <3500000>; > > + regulator-always-on; > > + }; > > + > > + axp_rtc_reg: ldo1 { > > + regulator-always-on; > > + }; > > + > > + axp_analog_reg: ldo2 { > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-always-on; > > + }; > > + > > + axp_pll_reg: ldo3 { > > + regulator-min-microvolt = <700000>; > > + regulator-max-microvolt = <3500000>; > > + }; > > + > > + axp_hdmi_reg: ldo4 { > > + regulator-min-microvolt = <1250000>; > > + regulator-max-microvolt = <3300000>; > > + }; > > + > > + axp_mic_reg: ldo5 { > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <3300000>; > > + }; > > + }; > > +}; > > + > -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
