On Sun, Jun 29, 2014 at 07:23:54PM +0100, Carlo Caione wrote:
> This patch add support for the Power Enable Key found on MFD AXP202 and
> AXP209. Besides the basic support for the button, the driver adds two
> entries in sysfs to configure the time delay for power on/off.
>
> Signed-off-by: Carlo Caione <[email protected]>
> Acked-by: Dmitry Torokhov <[email protected]>
> ---
> drivers/input/misc/Kconfig | 11 ++
> drivers/input/misc/Makefile | 1 +
> drivers/input/misc/axp20x-pek.c | 281
> ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 293 insertions(+)
> create mode 100644 drivers/input/misc/axp20x-pek.c
[...]
> +static int axp20x_pek_probe(struct platform_device *pdev)
> +{
> + struct axp20x_pek *axp20x_pek;
> + struct axp20x_dev *axp20x;
> + struct input_dev *idev;
> + int error;
> +
> + axp20x_pek = devm_kzalloc(&pdev->dev, sizeof(struct axp20x_pek),
> + GFP_KERNEL);
You can use sizeof(*axp20x_pek) here.
[...]
> +static struct platform_driver axp20x_pek_driver = {
> + .probe = axp20x_pek_probe,
> + .remove = axp20x_pek_remove,
> + .driver = {
> + .name = "axp20x-pek",
> + .owner = THIS_MODULE,
> + },
> +};
> +module_platform_driver(axp20x_pek_driver);
So this requires platform data rather than a DTB? Or have I missed
something?
Thanks,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
