On Thu, Oct 09, 2014 at 05:21:58PM -0700, Andrew Duggan wrote:
> On 10/09/2014 10:28 AM, Dmitry Torokhov wrote:
> >On Thu, Oct 09, 2014 at 09:52:46AM -0700, Dmitry Torokhov wrote:
> >>On Thu, Oct 09, 2014 at 11:34:26AM +0200, Nicole Faerber wrote:
> >>>Hi!
> >>>Just installed the just released 3.17 kernel and found a bad behavior of
> >>>the new Synaptics driver on my Thinkpad Yoga which has the new Synaptics
> >>>clickpad enabled touchpad:
> >>>
> >>>psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1,
> >>>caps: 0xd002a3/0x940300/0x12f800, board id: 2911, fw id: 2560
> >>>
> >>>The issue is that now a button release is only issued after the finger
> >>>has completely left the touchpad and not when releasing the physical
> >>>button. Is this physical button now called FORCEPAD? Anyway, this is
> >>>pretty annoying. Double clicking become a real pain.
> >>>I did comment out the new
> >>>
> >>> if (SYN_CAP_FORCEPAD(priv->ext_cap_0c)) {
> >>> ...
> >>>
> >>>and everything is back to normal again, i.e. when I do release the pad
> >>>physical button but keep the finger on the pad, the button release event
> >>>is issued properly.
> >>Hmm, the forcepad code should only activate if the devoice do4es not
> >>have physical buttons at all. Let me see what's the diffference in
> >>capabilities between your and mine touchpads...
> >OK, so your extended caps are 0x12f800 while on my forcepad they are
> >0x12e800. The forcepad bit is supposed to be bit 15, so it is set for
> >both our devices, but bit 12 (counting from 0) is different.
> >
> >Andrew, Chris, could you please tell us what bit 12 indicates? In fact,
> >if you could share the updated description for all currently defined
> >capability bits that would be awesome.
> >
> >Thanks!
> >
> Hmm, looks like I got incorrect information about the ForcePad
> capabilities bit and unfortunately there does not seem to be a
> capabilities bit for ForcePad on PS/2. Too bad that wasn't caught
> before 3.17 was released. Bit 12 is for "uniform clickpad" which
> means that the whole clickpad moves when you press it as opposed to
> it being hinged at the top. That makes sense that a ForcePad would
> not have that capability.
Argh, that is unfortunate. Well, I guess we are back to DMI checks.
Thanks.
--
Dmitry
Input: synaptics - gate forcepad support by DMI check
From: Dmitry Torokhov <[email protected]>
Unfortunately, ForcePad capability is not actually exported over PS/2, so
we have to resort to DMI checks.
Cc: [email protected]
Reported-by: Nicole Faerber <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
---
drivers/input/mouse/synaptics.c | 22 +++++++++++++++++++++-
drivers/input/mouse/synaptics.h | 8 ++------
2 files changed, 23 insertions(+), 7 deletions(-)
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 6394d9b..9031a0a 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -607,6 +607,8 @@ static void synaptics_parse_agm(const unsigned char buf[],
priv->agm_pending = true;
}
+static bool is_forcepad;
+
static int synaptics_parse_hw_state(const unsigned char buf[],
struct synaptics_data *priv,
struct synaptics_hw_state *hw)
@@ -636,7 +638,7 @@ static int synaptics_parse_hw_state(const unsigned char
buf[],
hw->left = (buf[0] & 0x01) ? 1 : 0;
hw->right = (buf[0] & 0x02) ? 1 : 0;
- if (SYN_CAP_FORCEPAD(priv->ext_cap_0c)) {
+ if (is_forcepad) {
/*
* ForcePads, like Clickpads, use middle button
* bits to report primary button clicks.
@@ -1667,11 +1669,29 @@ static const struct dmi_system_id __initconst
cr48_dmi_table[] = {
{ }
};
+static const struct dmi_system_id forcepad_dmi_table[] __initconst = {
+#if defined(CONFIG_DMI) && defined(CONFIG_X86)
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP EliteBook Folio 1040
G1"),
+ },
+ },
+#endif
+ { }
+};
+
void __init synaptics_module_init(void)
{
impaired_toshiba_kbc = dmi_check_system(toshiba_dmi_table);
broken_olpc_ec = dmi_check_system(olpc_dmi_table);
cr48_profile_sensor = dmi_check_system(cr48_dmi_table);
+
+ /*
+ * Unfortunately ForcePad capability is not exported over PS/2,
+ * so we have to resort to checking DMI.
+ */
+ is_forcepad = dmi_check_system(forcepad_dmi_table);
}
static int __synaptics_init(struct psmouse *psmouse, bool absolute_mode)
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index fb2e076..1bd01f2 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -77,12 +77,9 @@
* for noise.
* 2 0x08 image sensor image sensor tracks 5 fingers, but only
* reports 2.
+ * 2 0x01 uniform clickpad whole clickpad moves instead of being
+ * hinged at the top.
* 2 0x20 report min query 0x0f gives min coord reported
- * 2 0x80 forcepad forcepad is a variant of clickpad that
- * does not have physical buttons but
rather
- * uses pressure above certain threshold to
- * report primary clicks. Forcepads also
have
- * clickpad bit set.
*/
#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100000) /* 1-button
ClickPad */
#define SYN_CAP_CLICKPAD2BTN(ex0c) ((ex0c) & 0x000100) /* 2-button
ClickPad */
@@ -91,7 +88,6 @@
#define SYN_CAP_ADV_GESTURE(ex0c) ((ex0c) & 0x080000)
#define SYN_CAP_REDUCED_FILTERING(ex0c) ((ex0c) & 0x000400)
#define SYN_CAP_IMAGE_SENSOR(ex0c) ((ex0c) & 0x000800)
-#define SYN_CAP_FORCEPAD(ex0c) ((ex0c) & 0x008000)
/* synaptics modes query bits */
#define SYN_MODE_ABSOLUTE(m) ((m) & (1 << 7))
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html