On Sat, Oct 18, 2014 at 02:52:09PM +0200, Linus Walleij wrote:
> The bitmask comment says it will enable GPIO 8-14 and 16-20
> for keypad use, but it actually enables GPIO 8-11 and 13-20
> due to a bit error.
>
> Instead of masking of the "hole" at GPIO 12 (which is used
> for keypad output 4) mask of the proper "hole" at GPIO 15.
>
> Signed-off-by: Linus Walleij <[email protected]>
> ---
> Hi Dmitry, this is for fixes I think.
Applied, thank you.
> ---
> drivers/input/keyboard/stmpe-keypad.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/input/keyboard/stmpe-keypad.c
> b/drivers/input/keyboard/stmpe-keypad.c
> index c6727dda68f2..ef5e67fb567e 100644
> --- a/drivers/input/keyboard/stmpe-keypad.c
> +++ b/drivers/input/keyboard/stmpe-keypad.c
> @@ -86,7 +86,7 @@ static const struct stmpe_keypad_variant
> stmpe_keypad_variants[] = {
> .max_cols = 8,
> .max_rows = 12,
> .col_gpios = 0x0000ff, /* GPIO 0 - 7*/
> - .row_gpios = 0x1fef00, /* GPIO 8-14, 16-20 */
> + .row_gpios = 0x1f7f00, /* GPIO 8-14, 16-20 */
> },
> [STMPE2403] = {
> .auto_increment = true,
> --
> 1.9.3
>
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
