Fix the "pound" key that being mapped to Shift+3 was returning '£' instead
of '#' when using an Italian keyboard mapping and use the same values as
the cm109.c driver (which was based on this yealink.c driver) also for '0'
to '9' and for '*'.

Signed-off-by: Daniele Forsi <[email protected]>
---
 drivers/input/misc/yealink.c | 39 +++++++++++++++------------------------
 1 file changed, 15 insertions(+), 24 deletions(-)

diff --git a/drivers/input/misc/yealink.c b/drivers/input/misc/yealink.c
index 79c964c..e9403da 100644
--- a/drivers/input/misc/yealink.c
+++ b/drivers/input/misc/yealink.c
@@ -212,27 +212,24 @@ static int map_p1k_to_key(int scancode)
        case 0x03: return KEY_ENTER;    /*   pickup     */
        case 0x14: return KEY_BACKSPACE; /*  C          */
        case 0x13: return KEY_ESC;      /*   hangup     */
-       case 0x00: return KEY_1;        /*   1          */
-       case 0x01: return KEY_2;        /*   2          */
-       case 0x02: return KEY_3;        /*   3          */
-       case 0x10: return KEY_4;        /*   4          */
-       case 0x11: return KEY_5;        /*   5          */
-       case 0x12: return KEY_6;        /*   6          */
-       case 0x20: return KEY_7;        /*   7          */
-       case 0x21: return KEY_8;        /*   8          */
-       case 0x22: return KEY_9;        /*   9          */
-       case 0x30: return KEY_KPASTERISK; /* *          */
-       case 0x31: return KEY_0;        /*   0          */
-       case 0x32: return KEY_LEFTSHIFT |
-                         KEY_3 << 8;   /*   #          */
+       case 0x00: return KEY_NUMERIC_1;        /*   1          */
+       case 0x01: return KEY_NUMERIC_2;        /*   2          */
+       case 0x02: return KEY_NUMERIC_3;        /*   3          */
+       case 0x10: return KEY_NUMERIC_4;        /*   4          */
+       case 0x11: return KEY_NUMERIC_5;        /*   5          */
+       case 0x12: return KEY_NUMERIC_6;        /*   6          */
+       case 0x20: return KEY_NUMERIC_7;        /*   7          */
+       case 0x21: return KEY_NUMERIC_8;        /*   8          */
+       case 0x22: return KEY_NUMERIC_9;        /*   9          */
+       case 0x30: return KEY_NUMERIC_STAR;     /*   *          */
+       case 0x31: return KEY_NUMERIC_0;        /*   0          */
+       case 0x32: return KEY_NUMERIC_POUND;    /*   #          */
        }
        return -EINVAL;
 }
 
 /* Completes a request by converting the data into events for the
  * input subsystem.
- *
- * The key parameter can be cascaded: key2 << 8 | key1
  */
 static void report_key(struct yealink_dev *yld, int key)
 {
@@ -240,17 +237,13 @@ static void report_key(struct yealink_dev *yld, int key)
 
        if (yld->key_code >= 0) {
                /* old key up */
-               input_report_key(idev, yld->key_code & 0xff, 0);
-               if (yld->key_code >> 8)
-                       input_report_key(idev, yld->key_code >> 8, 0);
+               input_report_key(idev, yld->key_code, 0);
        }
 
        yld->key_code = key;
        if (key >= 0) {
                /* new valid key */
-               input_report_key(idev, key & 0xff, 1);
-               if (key >> 8)
-                       input_report_key(idev, key >> 8, 1);
+               input_report_key(idev, key, 1);
        }
        input_sync(idev);
 }
@@ -966,9 +959,7 @@ static int usb_probe(struct usb_interface *intf, const 
struct usb_device_id *id)
        for (i = 0; i < 256; i++) {
                int k = map_p1k_to_key(i);
                if (k >= 0) {
-                       set_bit(k & 0xff, input_dev->keybit);
-                       if (k >> 8)
-                               set_bit(k >> 8, input_dev->keybit);
+                       set_bit(k, input_dev->keybit);
                }
        }
 
-- 
2.1.3

--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to