On Fri, Dec 26, 2014 at 09:36:48PM -0600, Felipe Balbi wrote:
> With this driver, we can report KEY_POWER on
> AM437x SK. This patch has been tested with said
> board.
>
> Signed-off-by: Felipe Balbi <[email protected]>
Applied, thank you.
> ---
>
> Changes since v1:
> - Add device tree documentation
> - s/ret/error
> - removed 'pressed' as input core will filter events
> - use a saner name when requesting IRQ. dev_name(dev) will return
> $i2c_bus_address.i2c-omap:0-0024:tps65218-pwrbutton
> - remove blank line before MODULE_DEVICE_TABLE()
>
> .../bindings/input/tps65218-pwrbutton.txt | 17 +++
> drivers/input/misc/Kconfig | 10 ++
> drivers/input/misc/Makefile | 1 +
> drivers/input/misc/tps65218-pwrbutton.c | 124
> +++++++++++++++++++++
> 4 files changed, 152 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
> create mode 100644 drivers/input/misc/tps65218-pwrbutton.c
>
> diff --git a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
> b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
> new file mode 100644
> index 0000000..e30e0b9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
> @@ -0,0 +1,17 @@
> +Texas Instruments TPS65218 power button
> +
> +This driver provides a simple power button event via an Interrupt.
> +
> +Required properties:
> +- compatible: should be "ti,tps65218-pwrbutton"
> +- interrupts: should be one of the following
> + - <3 IRQ_TYPE_EDGE_BOTH>: For controllers compatible with tps65218
> +
> +Example:
> +
> +&tps {
> + power-button {
> + compatible = "ti,tps65218-pwrbutton";
> + interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
> + };
> +};
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index 23297ab..364cfb8 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -404,6 +404,16 @@ config INPUT_RETU_PWRBUTTON
> To compile this driver as a module, choose M here. The module will
> be called retu-pwrbutton.
>
> +config INPUT_TPS65218_PWRBUTTON
> + tristate "TPS65218 Power button driver"
> + depends on MFD_TPS65218
> + help
> + Say Y here if you want to enable power buttong reporting for
> + the TPS65218 Power Management IC device.
> +
> + To compile this driver as a module, choose M here. The module will
> + be called tps65218-pwrbutton.
> +
> config INPUT_TWL4030_PWRBUTTON
> tristate "TWL4030 Power button Driver"
> depends on TWL4030_CORE
> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> index 19c7603..a923753 100644
> --- a/drivers/input/misc/Makefile
> +++ b/drivers/input/misc/Makefile
> @@ -59,6 +59,7 @@ obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
> obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o
> obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY) += soc_button_array.o
> obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o
> +obj-$(CONFIG_INPUT_TPS65218_PWRBUTTON) += tps65218-pwrbutton.o
> obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON) += twl4030-pwrbutton.o
> obj-$(CONFIG_INPUT_TWL4030_VIBRA) += twl4030-vibra.o
> obj-$(CONFIG_INPUT_TWL6040_VIBRA) += twl6040-vibra.o
> diff --git a/drivers/input/misc/tps65218-pwrbutton.c
> b/drivers/input/misc/tps65218-pwrbutton.c
> new file mode 100644
> index 0000000..2f85e2e
> --- /dev/null
> +++ b/drivers/input/misc/tps65218-pwrbutton.c
> @@ -0,0 +1,124 @@
> +/*
> + * Texas Instruments' TPS65218 Power Button Input Driver
> + *
> + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
> + * Author: Felipe Balbi <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/init.h>
> +#include <linux/input.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/tps65218.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +
> +struct tps65218_pwrbutton {
> + struct device *dev;
> + struct tps65218 *tps;
> + struct input_dev *idev;
> +};
> +
> +static irqreturn_t tps65218_pwr_irq(int irq, void *_pwr)
> +{
> + struct tps65218_pwrbutton *pwr = _pwr;
> + unsigned int reg;
> + int error;
> +
> + error = tps65218_reg_read(pwr->tps, TPS65218_REG_STATUS, ®);
> + if (error) {
> + dev_err(pwr->dev, "can't read register --> %d\n", error);
> + goto out;
> + }
> +
> + if (reg & TPS65218_STATUS_PB_STATE) {
> + input_report_key(pwr->idev, KEY_POWER, 1);
> + pm_wakeup_event(pwr->dev, 0);
> + } else {
> + input_report_key(pwr->idev, KEY_POWER, 0);
> + }
> +
> + input_sync(pwr->idev);
> +
> +out:
> + return IRQ_HANDLED;
> +}
> +
> +static int tps65218_pwron_probe(struct platform_device *pdev)
> +{
> + struct tps65218 *tps = dev_get_drvdata(pdev->dev.parent);
> + struct device *dev = &pdev->dev;
> + struct tps65218_pwrbutton *pwr;
> + struct input_dev *idev;
> + int error;
> + int irq;
> +
> + pwr = devm_kzalloc(dev, sizeof(*pwr), GFP_KERNEL);
> + if (!pwr)
> + return -ENOMEM;
> +
> + idev = devm_input_allocate_device(dev);
> + if (!idev)
> + return -ENOMEM;
> +
> + idev->name = "tps65218_pwrbutton";
> + idev->phys = "tps65218_pwrbutton/input0";
> + idev->dev.parent = dev;
> + idev->id.bustype = BUS_I2C;
> +
> + input_set_capability(idev, EV_KEY, KEY_POWER);
> +
> + pwr->tps = tps;
> + pwr->dev = dev;
> + pwr->idev = idev;
> + platform_set_drvdata(pdev, pwr);
> + device_init_wakeup(dev, true);
> +
> + irq = platform_get_irq(pdev, 0);
> + error = devm_request_threaded_irq(dev, irq, NULL, tps65218_pwr_irq,
> + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
> IRQF_ONESHOT,
> + "tps65218-pwrbutton", pwr);
> + if (error) {
> + dev_err(dev, "failed to request IRQ #%d --> %d\n",
> + irq, error);
> + return error;
> + }
> +
> + error= input_register_device(idev);
> + if (error) {
> + dev_err(dev, "Can't register power button --> %d\n", error);
> + return error;
> + }
> +
> + return 0;
> +}
> +
> +static struct of_device_id of_tps65218_pwr_match[] = {
> + { .compatible = "ti,tps65218-pwrbutton" },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, of_tps65218_pwr_match);
> +
> +static struct platform_driver tps65218_pwron_driver = {
> + .probe = tps65218_pwron_probe,
> + .driver = {
> + .name = "tps65218_pwrbutton",
> + .of_match_table = of_tps65218_pwr_match,
> + },
> +};
> +module_platform_driver(tps65218_pwron_driver);
> +
> +MODULE_DESCRIPTION("TPS65218 Power Button");
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Felipe Balbi <[email protected]>");
> --
> 2.2.0
>
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
