On Mon, 2015-01-12 at 11:57 +0800, Antonio Borneo wrote:
> On Mon, Jan 12, 2015 at 9:55 AM, Srinivas Pandruvada
> <[email protected]> wrote:
> > Some hid sensor feature report can contain more than one reports.
> > This API can now support receiving multiple values from the feature
> > report.
> > Also update the parameters in the users of this API.
> >
> > Signed-off-by: Srinivas Pandruvada <[email protected]>
> > ---
> > drivers/hid/hid-sensor-hub.c | 16
> > ++++++++++++++--
> > drivers/iio/common/hid-sensors/hid-sensor-attributes.c | 13 +++++++------
> > drivers/iio/common/hid-sensors/hid-sensor-trigger.c | 4 ++--
> > include/linux/hid-sensor-hub.h | 8 +++++---
> > 4 files changed, 28 insertions(+), 13 deletions(-)
> >
> > diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c
> > index 83b6e15..d17aa67 100644
> > --- a/drivers/hid/hid-sensor-hub.c
> > +++ b/drivers/hid/hid-sensor-hub.c
> > @@ -218,10 +218,11 @@ done_proc:
> > EXPORT_SYMBOL_GPL(sensor_hub_set_feature);
> >
> > int sensor_hub_get_feature(struct hid_sensor_hub_device *hsdev, u32
> > report_id,
> > - u32 field_index, s32 *value)
> > + u32 field_index, int buffer_size, void *buffer)
> > {
> > struct hid_report *report;
> > struct sensor_hub_data *data = hid_get_drvdata(hsdev->hdev);
> > + int report_size;
> > int ret = 0;
> >
> > mutex_lock(&data->mutex);
> > @@ -233,7 +234,18 @@ int sensor_hub_get_feature(struct
> > hid_sensor_hub_device *hsdev, u32 report_id,
> > }
> > hid_hw_request(hsdev->hdev, report, HID_REQ_GET_REPORT);
> > hid_hw_wait(hsdev->hdev);
> > - *value = report->field[field_index]->value[0];
> > +
> > + /* calculate number of bytes required to read this field */
> > + report_size = report->field[field_index]->report_size / 8;
> > + if (report->field[field_index]->report_size % 8)
> > + ++report_size;
> > + report_size *= report->field[field_index]->report_count;
>
> Hi Srinivas,
Hi Antonio,
>
> I resend my reply.
> It was discarded by the mailing list due to wrong setting with html
> formatting.
>
> I think would be more clear writing directly:
>
> report_size = DIV_ROUND_UP(report->field[field_index]->report_size,
> 8) *
> report->field[field_index]->report_count;
Correct. I will resubmit this one.
Thanks,
Srinivas
>
> Regards,
> Antonio
>
> > + if (!report_size) {
> > + ret = -EINVAL;
> > + goto done_proc;
> > + }
> > + ret = min(report_size, buffer_size);
> > + memcpy(buffer, report->field[field_index]->value, ret);
> >
> > done_proc:
> > mutex_unlock(&data->mutex);
> > diff --git a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
> > b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
> > index 25b01e1..e1435e9 100644
> > --- a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
> > +++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
> > @@ -153,8 +153,8 @@ s32 hid_sensor_read_poll_value(struct hid_sensor_common
> > *st)
> > int ret;
> >
> > ret = sensor_hub_get_feature(st->hsdev,
> > - st->poll.report_id,
> > - st->poll.index, &value);
> > + st->poll.report_id,
> > + st->poll.index, sizeof(value), &value);
> >
> > if (ret < 0 || value < 0) {
> > return -EINVAL;
> > @@ -174,8 +174,8 @@ int hid_sensor_read_samp_freq_value(struct
> > hid_sensor_common *st,
> > int ret;
> >
> > ret = sensor_hub_get_feature(st->hsdev,
> > - st->poll.report_id,
> > - st->poll.index, &value);
> > + st->poll.report_id,
> > + st->poll.index, sizeof(value), &value);
> > if (ret < 0 || value < 0) {
> > *val1 = *val2 = 0;
> > return -EINVAL;
> > @@ -229,8 +229,9 @@ int hid_sensor_read_raw_hyst_value(struct
> > hid_sensor_common *st,
> > int ret;
> >
> > ret = sensor_hub_get_feature(st->hsdev,
> > - st->sensitivity.report_id,
> > - st->sensitivity.index, &value);
> > + st->sensitivity.report_id,
> > + st->sensitivity.index, sizeof(value),
> > + &value);
> > if (ret < 0 || value < 0) {
> > *val1 = *val2 = 0;
> > return -EINVAL;
> > diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
> > b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
> > index 92068cd..ef0c495 100644
> > --- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
> > +++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
> > @@ -76,8 +76,8 @@ int hid_sensor_power_state(struct hid_sensor_common *st,
> > bool state)
> > }
> >
> > sensor_hub_get_feature(st->hsdev, st->power_state.report_id,
> > - st->power_state.index,
> > - &state_val);
> > + st->power_state.index,
> > + sizeof(state_val), &state_val);
> > return 0;
> > }
> > EXPORT_SYMBOL(hid_sensor_power_state);
> > diff --git a/include/linux/hid-sensor-hub.h b/include/linux/hid-sensor-hub.h
> > index 0b21c4f..1995bbd 100644
> > --- a/include/linux/hid-sensor-hub.h
> > +++ b/include/linux/hid-sensor-hub.h
> > @@ -203,13 +203,15 @@ int sensor_hub_set_feature(struct
> > hid_sensor_hub_device *hsdev, u32 report_id,
> > * @hsdev: Hub device instance.
> > * @report_id: Report id to look for
> > * @field_index: Field index inside a report
> > -* @value: Place holder for return value
> > +* @buffer_size: size of the buffer
> > +* @buffer: buffer to copy output
> > *
> > * Used to get a field in feature report. For example this can get polling
> > -* interval, sensitivity, activate/deactivate state.
> > +* interval, sensitivity, activate/deactivate state. On success it returns
> > +* number of bytes copied to buffer. On failure, it returns value < 0.
> > */
> > int sensor_hub_get_feature(struct hid_sensor_hub_device *hsdev, u32
> > report_id,
> > - u32 field_index, s32 *value);
> > + u32 field_index, int buffer_size, void *buffer);
> >
> > /* hid-sensor-attributes */
> >
> > --
> > 1.9.3
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-input" in
> > the body of a message to [email protected]
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
