Dear Vincent: No,boot dmesg is not needed. But I need cursor move log!
Please follow below steps and get log file: Step1.find device node $cat /proc/bus/input/device Example: Name: "ETPS/2 Elantech Touchpad" /devices/platform/i8042/serio1/input/ ---------------- Step2. Open debug function. $sudo su $echo 2 > /sys/devices/platform/i8042/serio1/debug ---------------- Step3. Put your forefinger on Touchpad and move. ---------------- Step4. Confirm the correctness of the information. example message: psmouse serio1: elantech: PS/2 packet[..]… dmesg ---------------- Step5.save log message dmesg >> fingerLog.txt --------------- Step6.send fingerLog.txt file to me. --------------- I really appreciate your help. BR, Sam -----Original Message----- From: Vincent Jaubert [mailto:[email protected]] Sent: Wednesday, February 04, 2015 1:17 AM To: 洪一竹 Cc: Rainer Koenig; duson; Dmitry Torokhov; [email protected]; [email protected]; [email protected]; [email protected] Subject: Re: input: elantech.c: adding more Fujtisu notebooks to force crc_enabled My Laptop is a Fujitsu E554 with Elantech Touchpad and trackpoint. The touchpad works correctly since Rainer's patch. Do you still need the boot dmesg ? With or without the patch ? On Tue, Feb 3, 2015 at 1:50 PM, 洪一竹 <[email protected]> wrote: > Dear Rainer: > > This information is useful. > I really appreciate your help! > > BR, > Sam > -----Original Message----- > From: Rainer Koenig [mailto:[email protected]] > Sent: Tuesday, February 03, 2015 8:28 PM > To: 洪一竹; 'duson'; 'Dmitry Torokhov' > Cc: [email protected]; [email protected]; > [email protected]; [email protected] > Subject: Re: input: elantech.c: adding more Fujtisu notebooks to force > crc_enabled > > Dear Sam, > > unfortunately I'm on sick leave this week so far away from my lab and with no > access to the system. What data do you need? > On request of Ulrik I had a look at the firmware and capabilities and posted > another "patch" last week, maybe this already answers your question. > > > + * Fujitsu LIFEBOOK E544 0x470f00 d0, 12, 09 2 hw buttons > + * Fujitsu LIFEBOOK E554 0x570f01 40, 14, 0c 2 hw buttons > > If this doesn't help then please be patient until next week when I'm back in > the lab. > > Regards > Rainer > > Am 03.02.2015 um 02:00 schrieb 洪一竹 : >> Dear Rainer: >> >> Please help us get the computer records. >> as below steps: >> >> Step1.open terminal. >> Step2.reboot pc >> Step3.dmesg > elanTouch.txt >> Step4.send elanTouch.txt to me. >> >> **Keeping mount elan Touchpad on PC. >> >> Thanks! >> >> BR, >> Sam >> -----Original Message----- >> From: duson [mailto:[email protected]] >> Sent: Wednesday, January 28, 2015 11:38 AM >> To: 'Dmitry Torokhov'; 'Rainer Koenig'; [email protected] >> Cc: [email protected]; [email protected]; >> [email protected]; [email protected] >> Subject: RE: input: elantech.c: adding more Fujtisu notebooks to >> force crc_enabled >> >> Loop Sam >> >> Hi Sam, >> Please help to take care this. >> >> Duson >> >>> -----Original Message----- >>> From: Dmitry Torokhov [mailto:[email protected]] >>> Sent: Wednesday, January 28, 2015 7:28 AM >>> To: Rainer Koenig >>> Cc: [email protected]; [email protected]; >>> [email protected]; [email protected]; Duson Lin >>> Subject: Re: input: elantech.c: adding more Fujtisu notebooks to >>> force crc_enabled >>> >>> On Tue, Jan 27, 2015 at 09:20:57AM +0100, Rainer Koenig wrote: >>>> Extending the patch from November 2014 with two more >>> Fujitsu LIFEBOOK >>>> models that also ship the Elantech touchpad and don't work with >>>> crc_disabled. >>>> >>>> Signed-off-by: Rainer Koenig <[email protected]> >>> >>> Applied, thank you. >>> >>> However I am not happy with the direction we are going - the fact >>> that we need to add more and more laptops to the quirk. It would be >>> better if we could detect whether we need CRC or not by querying the >>> touchpad somehow. Elantech folks, could you help us here? >>> >>> Thanks! >>> >>>> >>>> --- >>>> My responsibility is enabling Linux on Fujitsu desktops and >>> sometimes >>>> also notebooks. Stumbled into this issue during investigation of a >>>> customer project and successfully tested the patch on both machines. >>>> >>>> diff -uNr old/drivers/input/mouse/elantech.c >>> new/drivers/input/mouse/elantech.c >>>> --- old/drivers/input/mouse/elantech.c 2015-01-27 >>> 08:51:18.101122218 +0100 >>>> +++ new/drivers/input/mouse/elantech.c 2015-01-27 >>> 08:51:00.880921663 +0100 >>>> @@ -1475,6 +1475,20 @@ >>>> DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H730"), >>>> }, >>>> }, >>>> + { >>>> + /* Fujitsu LIFEBOOK E554 does not work with >>> crc_enabled == 0 */ >>>> + .matches = { >>>> + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), >>>> + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E554"), >>>> + }, >>>> + }, >>>> + { >>>> + /* Fujitsu LIFEBOOK E544 does not work with >>> crc_enabled == 0 */ >>>> + .matches = { >>>> + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), >>>> + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E544"), >>>> + }, >>>> + }, >>>> #endif >>>> { } >>>> }; >>>> >>>> -- >>>> Dipl.-Inf. (FH) Rainer Koenig >>>> Project Manager Linux Clients >>>> Dept. PDG WPS R&D SW OSE >>>> >>>> Fujitsu Technology Solutions >>>> Bürgermeister-Ullrich-Str. 100 >>>> 86199 Augsburg >>>> Germany >>>> >>>> Telephone: +49-821-804-3321 >>>> Telefax: +49-821-804-2131 >>>> Mail: mailto:[email protected] >>>> >>>> Internet ts.fujtsu.com >>>> Company Details ts.fujitsu.com/imprint.html >>> >>> -- >>> Dmitry >>> >> >> >> > > > -- > Dipl.-Inf. (FH) Rainer Koenig > Project Manager Linux Business Clients Dept. TSP WPS R&D SW OSE > > Fujitsu Technology Solutions > Bürgermeister-Ullrich-Str. 100 > 86199 Augsburg > Germany > > Telephone: +49-821-804-3321 > Telefax: +49-821-804-2131 > Mail: mailto:[email protected] > > Internet ts.fujitsu.com > Company Details ts.fujitsu.com/imprint.html > > -- > To unsubscribe from this list: send the line "unsubscribe linux-input" > in the body of a message to [email protected] More majordomo > info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
