On Tue, Mar 17, 2015 at 03:00:46PM +0100, Javier Martinez Canillas wrote:
> From: Sjoerd Simons <sjoerd.sim...@collabora.co.uk>
>
> If the "linux,gpio-keymap" DT property is defined, the T19 keys are configured
> and the device is setup as a touchpad rather than a touchscreen. The logic is
> part of the input device initialization routine but it can be factored out to
> its own function to simplify the former.
>
> Signed-off-by: Sjoerd Simons <sjoerd.sim...@collabora.co.uk>
> Signed-off-by: Javier Martinez Canillas <javier.marti...@collabora.co.uk>
> ---
> drivers/input/touchscreen/atmel_mxt_ts.c | 48
> +++++++++++++++++++-------------
> 1 file changed, 28 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c
> b/drivers/input/touchscreen/atmel_mxt_ts.c
> index 749371761669..e2e55cf857cb 100644
> --- a/drivers/input/touchscreen/atmel_mxt_ts.c
> +++ b/drivers/input/touchscreen/atmel_mxt_ts.c
> @@ -1815,15 +1815,40 @@ static int mxt_read_t100_config(struct mxt_data *data)
> static int mxt_input_open(struct input_dev *dev);
> static void mxt_input_close(struct input_dev *dev);
>
> +static bool mxt_initialize_t19(struct input_dev *input_dev,
> + struct mxt_data *data)
I renamed it as mxt_set_up_as_touchpad() and made void, otherwise
applied.
Thanks.
> +{
> + const struct mxt_platform_data *pdata = data->pdata;
> + int i;
> +
> + if (pdata->t19_num_keys) {
> + __set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
> +
> + for (i = 0; i < pdata->t19_num_keys; i++)
> + if (pdata->t19_keymap[i] != KEY_RESERVED)
> + input_set_capability(input_dev, EV_KEY,
> + pdata->t19_keymap[i]);
> +
> + input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM);
> + input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM);
> + input_abs_set_res(input_dev, ABS_MT_POSITION_X,
> + MXT_PIXELS_PER_MM);
> + input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
> + MXT_PIXELS_PER_MM);
> +
> + input_dev->name = "Atmel maXTouch Touchpad";
> + return true;
> + }
> + return false;
> +}
> +
> static int mxt_initialize_input_device(struct mxt_data *data)
> {
> struct device *dev = &data->client->dev;
> - const struct mxt_platform_data *pdata = data->pdata;
> struct input_dev *input_dev;
> int error;
> unsigned int num_mt_slots;
> unsigned int mt_flags = 0;
> - int i;
>
> switch (data->multitouch) {
> case MXT_TOUCH_MULTI_T9:
> @@ -1859,26 +1884,9 @@ static int mxt_initialize_input_device(struct mxt_data
> *data)
> set_bit(EV_ABS, input_dev->evbit);
> input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
>
> - if (pdata->t19_num_keys) {
> - __set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
> -
> - for (i = 0; i < pdata->t19_num_keys; i++)
> - if (pdata->t19_keymap[i] != KEY_RESERVED)
> - input_set_capability(input_dev, EV_KEY,
> - pdata->t19_keymap[i]);
> -
> + if (mxt_initialize_t19(input_dev, data))
> mt_flags |= INPUT_MT_POINTER;
>
> - input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM);
> - input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM);
> - input_abs_set_res(input_dev, ABS_MT_POSITION_X,
> - MXT_PIXELS_PER_MM);
> - input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
> - MXT_PIXELS_PER_MM);
> -
> - input_dev->name = "Atmel maXTouch Touchpad";
> - }
> -
> /* For single touch */
> input_set_abs_params(input_dev, ABS_X,
> 0, data->max_x, 0, 0);
> --
> 2.1.4
>
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
